Frymaster E4 Troubleshooting Controller and Heating Problems, Controller wont, Activate

Page 28

6.2Troubleshooting

6.2.1 Controller and Heating Problems

Problem

Probable Causes

Corrective Action

 

A. Power cord is not plugged in or

A. Plug power cord in and verify

 

that circuit breaker is not

 

circuit breaker is tripped.

 

tripped.

 

 

 

 

B. If any of the components in the

 

 

power supply system (including

Controller won't

 

the transformer and interface

activate.

B. Controller or power supply

board) fail, power will not be

 

component or interface board has

supplied to the controller and it

 

failed.

will not function. Determining

 

 

which component has failed is

 

 

beyond the scope of operator

 

 

troubleshooting. Call FASC.

 

 

 

 

 

A. A drain safety switch prevents

 

 

the heating element from being

 

A. Drain valve is open.

energized if the drain valve is

 

 

not fully closed. Verify that the

 

 

drain valve is fully closed.

 

 

B. If the circuitry in the fryer

 

 

control system cannot determine

 

 

the frypot temperature, the

Fryer does not heat.

 

system will not allow the

 

element to be energized or will

 

 

de-energize the element if it is

 

B. One or more other components

already energized. If the

 

have failed.

contactor, element, or associated

 

 

wiring fails, the element will not

 

 

energize. Determining which

 

 

specific component is

 

 

malfunctioning is beyond the

 

 

scope of operator

 

 

troubleshooting. Call FASC.

6-2

Image 28
Contents Hour Service Hotline Electric Fryers RE SeriesCanada Page Table of Contents RE Series E4 Electric Fryers Introduction Safety InformationGeneral European Community CE Specific Information Computer InformationDefinitions Shipping Damage Claim Procedure Service InformationRE Series E4 Electric Fryers Installation Instructions Australian Requirements Power Requirements Three 3 Phase RequirementsPage RE Series E4 Electric Fryers Operating Instructions Finding Your WAY around the Fpre Series E4 Electric FryerSetup Equipment Setup and Shutdown ProceduresShutdown Controllers RE Series E4 Electric Fryers Filtration Instructions Page Preparation for Use with Filter Paper or Filter Pad Preparation for Use with the Magnasol Filter Assembly Page Filter Pump Reset Switch Cleaning Reassembly Draining and Disposing of Waste OilRE Series E4 Electric Fryers Preventative Maintenance Page Annual/Periodic System Inspection FryerBuilt-In Filtration System RE Series E4 Electric Fryers Operator Troubleshooting IntroductionTroubleshooting Controller and Heating Problems Controller wontActivate Fryer does not heatProblem Fryer repeatedlyError Messages and Display Problems Problem Heating mode light Digital controllerDisplay is in wrong Solid state controllerBasket Lift Problems Filtration ProblemsSlow and bubbling But oil return is veryOil occurs This page Intentionally Left Blank Service Hotline
Related manuals
Manual 86 pages 38.42 Kb Manual 2 pages 51.67 Kb Manual 78 pages 9.63 Kb

E4 specifications

The Frymaster E4 is an advanced fryer that represents the cutting edge of commercial frying technology. Designed for efficiency and performance, it is favored by restaurants and fast-food chains looking to optimize their cooking processes while maintaining exceptional food quality.

One of the standout features of the Frymaster E4 is its programmable controls. With an intuitive digital interface, operators can easily adjust cooking temperatures, times, and even recipes with just a few taps. This level of precision ensures that food is consistently cooked to perfection every time, reducing waste and improving overall efficiency in the kitchen.

The E4 is equipped with high-performance burners that ensure rapid heating and recovery times. This means that cooking oil reaches the desired temperatures quickly, allowing for faster frying cycles. Thus, busy kitchens can meet high-demand periods without compromising quality or service speed. The fryer also features a high-efficiency oil filtration system that automatically removes contaminants and prolongs the life of the frying oil, resulting in a significant reduction in operating costs over time.

Another notable technology in the Frymaster E4 is its oil level management system, which actively monitors oil levels and alerts the operator when replenishment is necessary. This feature prevents overfilling or underfilling, both of which can negatively impact cooking performance and food quality.

Safety is also a top priority with the E4, as it incorporates features such as a built-in safety shut-off mechanism that activates if the temperature exceeds safe levels. Additionally, the fryer's robust construction minimizes the risks of spills and accidents in the kitchen, making it a reliable choice for high-traffic environments.

The Frymaster E4 also emphasizes energy efficiency, designed to meet stringent energy-saving standards without compromising performance. This is crucial in the current market, where energy costs can significantly impact overall profitability.

In conclusion, the Frymaster E4 offers an impressive combination of innovative technology, safety, and efficiency. Its programmable controls, high-performance frying capabilities, and advanced filtration and oil management systems make it an essential tool for any commercial kitchen aiming to enhance productivity and food quality. As the demands of the food industry continue to grow, the E4 stands out as a reliable partner for chefs looking to elevate their frying operations.