Jenn-Air WM27430P, W30400P manual To set

Page 35

The oven temperature can be adjusted if all oven temperatures are too low or too high and the length of time to cook ALL foods is too long or too short. De NOT adjust the temperature if only one or two items are not baking properly.

To adjust

1. Touch the Bake Pad.

2. Enter 500° by touching the number pads: "5,0,0".

3. Touch and hold the Bake Pad for 8 seconds until "00 °" appears in the Display.

4. Touch the appropriate number pads to enter the offset temperature. (Allowable range is -35 ° to +35°.) Note: Touching the Broil Pad will change the - sign to a positive number or back to a negative number.

Note: Do not change the temperature setting more than 10° before checking the oven.

5. Touch the Cancel Off Pad to return to the previous Display.

Important: The even should be adjusted only 10 ° and the oven should be tested. (We recommend baking two 9" yellow layer cakes using a purchased box mix.) If the oven temperature is still too low or too high, repeat the procedure described above.

The oven operation controls can be locked in the "OFF" position during cleaning or to prevent a child from accidentally turning them on. The oven functions which can be locked in the "OFF" position are: Bake, Convect Bake, Convect Roast, Probe, Broil and Clean. The control functions which can always be used regardless of lockout are: Timer, Clock and Oven Light.

To set

Touch and hold the Cook Time Pad and the Stop Time Pad simultaneously for four seconds. The Indicator Word "OFF" will appear and remain in the temperature digits for fifteen seconds.

Note: If an oven function is currently being used, the controls cannot be locked off.

Note: If someone touches an oven function pad, the Indicator Word "OFF" will again appear in the temperature digits for fifteen seconds.

To cancel

Touch and hold the Cook Time Pad and the Stop Time Pad simultaneously for four seconds. The Indicator Word "OFF" will appear briefly in the temperature digits and then go ott.

34

Image 35
Contents Models OlOww JENN-AIR Dealer from Whom Purchased Jean-Air Customer AssistanceBaking Baking Chart Causes of Cake Failure Convect Baking Baking Baking Chart Causes of Cake Failure Convect Baking Read before operating your oven Function Pads To programNumber Pads To set oven on Bake or Convect Bake or Convect Roast I000Rack Uses Different RacksBasi INSUCTiONS 12TohaPPNate number PadSI To setTime ofDayProgramming To cancel TimerOoo Lga.q o Page IIi!AAiiiiii?i i?iii !!iiiZ!ili2 Page Page Preheating is not necessary 6Oomedu3mo-35 Convect Roasting Frozen to Finish Temp. F linutes Use the Convect Roast Pad for best resultsOOO 8TopIz-3Lo,s 00 Hl 8TopIz-3Lo,s 00 Hl Ili¸iiiiii!,i!!i i!!iiiji !i Page To maintainthe clean temperature Steps to Follow for Self-Cleaning ProcessTo set oven to start cleaning immediately Close the ovendoor TouchClean Pad of ovento be cleaned1200 To set oven to start cleaning at a later timeTo cancel self-clean Glass Window or Glass Oven Door Front Oven Door TrimTo replace light bulb Control Panel Area and Display WindowTo set If foods bake unevenly If oven will not go through self-cleaning processHeat If baked food is burned or too brown on topMBJENN-AIR