Fifteen secondslater,the Displaywill return to currenttimeof day and the Indicator Word TIMED will appear in the Display.
8.Touch Stop Time Pad.
Indicator Words STOP TIME will flash. Display will show the calculated stop time based on current time of day and cook time.
Note" Probe settemperature will controlthe actualbake time. Probetemperature, not stop time, will turn oven off when food is done. Stop time is programmed for the purpose of computing start time.
9.Touch the appropriate number pads to enter stop time.
A stoptime can only beaccepted for later in the day. If an unacceptablestoptime is entered, "Err" wi(I flash briefly in the Display and then Display will return to previous acceptable Stop Time.
Example: If at 10 o'clock you set the oven for a probe temperature, for 325° convection roastingand 2 hours and 30 minutescooking time, the calculated stop time would be "12:30". The Display would show:
8TopIz-3Lo,s ]
If you want the stop time to be 1 o'clock,touch the number pads "1,0,0". After five seconds,the Displaywill brieflydisplaythe start time. Thus, the Display would show:
!g:39 Log }
After five seconds,the Display will return to current time of day, thus showing:
I 0:00 1 9s l
When selected temperature has been reached, the oven will shut off and a chime will sound four times. Plus, the actual probe temperature will flash and the word "End" will be in the Display. These words will remain in the Display and a chime will sound every minute for ten minutes or until the Cancel Off Pad is touched. If the probe is not removed, a beep will sound continuously until the probe is removed.
•To recall e selected temperature ot time: Touch the appropriate function pad./
•To change oven temperature set: Touch appropriate pad and touch thej
|
| appropriate number pads to enter new desired temperature. | / |
I | • | if more than five seconds elapse betweentouching a function pad and touching) | |
| , PO.TA.T | 1 | |
|
| a number pad, the | / |
24