Control Panel Area and Display Window
Wipe with soft cloth dampened with soapy water or glass cleaner. Do not spray any cleaning solutionsdirectly onto the display window or use large amounts of soap and water. Do not scrub with S.O.S.pads or abrasive cleaners.
Stainless Steel (select models)
Do not use any cleaning product containing chlorine bleach.
Always wipe with the grain when cleaning.
Daily Cleaning/LightSoil - Wipewithone ofthe following - soapywater,whitevinegar/ watersolution,Formula409GlassandSurfaceCleaneror
-using a sponge or soft cloth. Rinse and dry. To polish and help prevent fingerprints, followwith Stainless Steel Magic Spray
Moderate/Heavy Soil - Wipe with one of the following - Ben Ami or Soft Scrub - using adampspongeorsoft cloth. Rinseanddry. Stubbornsoilsmayberemovedwitha damp
Discoloration - Using a damp sponge or soft cloth, wipe with Cameo StainlessSteel Cleaner. Rinse immediately and dry. To removestreaksand restoreluster,follow with StainlessSteel MagicSpray
To removepull forwardto the "stop"position; lift up | _ |
on the front of the rackand pull out. |
|
Beforereplacingbulb, disconnectpower tooven at themain fuse or c/rcuitbreakerpaneL Be sure that the entire oven cavity includingthe light bulb is cool before attemptingto remove.
To replace light bulb
1. | Carefully unscrewthe glass light lens. |
|
2. | To obtain firm grasp on the bulb, wear protective rubber |
|
| gloves. Removebyturning bulbtotheleft. Do not toucha hot | j |
| ovenlight bulb with a damp cloth as bulb will break. Note: If |
|
| the bulb does break and you wish to remove it, be certain |
|
| power supply is disconnected and wear protective gloves. |
|
|
| |
| for service. |
|
3. | Replacebulbwith a 40 |
|
| withbrassbaseis recommendedto preventfusingof bulbinto |
|
| socket. |
|
4. | Replace bulb cover and reconnect power to oven. Reset |
|
| clock. |
|
33