Jenn-Air WM27430P, W30400P manual To setTime ofDay, Basi INSUCTiONS 12TohaPPNate number PadSI

When electrical power is supplied or after power interruption, the last clock time displayed before power was interrupted will flash. Time will advanceand continue to flash until clock is reset.

BASI_ INS_UCTiONS

12;To_haP_PNate:: number PadS:I

To setTime ofDay

I,TouchClockPad.

Indicatorword TIME will flash and time digits will appear in the Display. (If more than five seconds elapse between touching Clock Pad and touching a number pad, the Clock Pad must be touched again in order to set clock.)

2. Touch the appropriate number pads until correct time of day appears in Display.

Note: Five seconds after touching the number pads, the time of day will automatically be entered.

IMPORTANT

•To recalltime of day when another time function is showing: Touch Clock Pad.

•Clock time cannot be changed when oven has been programmed for Timed Bake,TimedConvectBake,Timed ConvectRoastor Self-clean. Cancelprogram before reprogramming clock.

10