Jenn-Air W30400P, WM27430P manual To cancel self-clean

Page 32

To cancel self-clean

•Touch Cancel Off Pad.

•The oven door will be locked while the LOCK Indicator Word remains in the Display. Depending on the length of time the oven had been self-cleaning, it may take up to 45 minutes for the oven to cool down, the door to unlock and cooling fan to turn off.

IMPORTANT

•Note WW30430 Owners: Both ovens CANNOT be cleaned at the same time. The

LOCK Indicator Word for the first oven must go off before setting the second oven for a clean

•Note WW30430 Owners: If one oven is set to clean, the other oven cannot be set for clock controlled baking.

•To recall cleaning time or stop time: Touch the appropriate pad (Clean Pad or Stop Time Pad).

•To change cleaning time or stop time before cleaning begins: Repeat the preceding steps.

•When the Clean Pad is touched, a fan comes on. If this fan is not operating, the oven will go through the cleaning process at a reduced oven temperature and the

oven will not clean effectively. If the fan does not operate, contact your authorized Jenn-Air Service Contractor for service.

•A slight odor may be detected, and if an oven is heavily soiled, some smoke may be visible. Some smoke and odor during the cleaning process is a normal occurrence. Since the oven is vented under the control panel, vapors, moisture, etc. may be seen coming from this area.

•During the cleaning process, do not be alarmed it an occasional flame is visible through the oven window. This is caused by excessive food soil that was not removed before the oven was set to clean.

•SINCE THE DOOR AND WINDOW OF THE OVEN WILL GET WARM DURING THE SELF-CLEANING PROCESS, AVOID CONTACT.

•Some types of soil may disintegrate but leave a light film or heavier deposit of ash. The amount of ash depends on the amount of soil which was in the oven. After oven has cooled, this ash may be removed with a damp sponge. If other dark deposits remain after wiping with a sponge, the time set for the length of cleaning was not enough. Increase the cleaning time for future cleanings or clean more frequently, The normal cleaning time is 3 hours. A maximum of 4 hours may be selected if necessary.

31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Models OlOww Jean-Air Customer Assistance JENN-AIR Dealer from Whom PurchasedBaking Baking Chart Causes of Cake Failure Convect Baking Baking Baking Chart Causes of Cake Failure Convect Baking Read before operating your oven To program Function PadsNumber Pads I000 To set oven on Bake or Convect Bake or Convect RoastDifferent Racks Rack UsesTo setTime ofDay Basi INSUCTiONS 12TohaPPNate number PadSITo cancel Timer ProgrammingOoo Lga.q o Page IIi!AAiiiiii?i i?iii !!iiiZ!ili2 Page Page Preheating is not necessary 6Oomedu3mo-35 Convect Roasting Frozen to Finish Use the Convect Roast Pad for best results Temp. F linutesOOO 8TopIz-3Lo,s 00 Hl 8TopIz-3Lo,s 00 Hl Ili¸iiiiii!,i!!i i!!iiiji !i Page Steps to Follow for Self-Cleaning Process To set oven to start cleaning immediatelyClose the ovendoor TouchClean Pad of ovento be cleaned To maintainthe clean temperatureTo set oven to start cleaning at a later time 1200To cancel self-clean Oven Door Trim Glass Window or Glass Oven Door FrontControl Panel Area and Display Window To replace light bulbTo set If oven will not go through self-cleaning process HeatIf baked food is burned or too brown on top If foods bake unevenlyMBJENN-AIR
Top Page Image Contents