GE JGBP34GEP, JGBP38GES manual Questions? Use This Problem Solver, consumer information service

QUESTIONS?

USE THIS PROBLEM SOLVER

PROBLEM

SURFACE LIGHT DOES NOT WORK

STRONG ODOR

OVEN WILL NOT

SELF-CLEAN

OVEN DOOR WEL

NOT ~LOCK

OVEN NOT CLEAN A~R

CLEAN CYCLE

“DOOr” APPEARS ON DISPLAY

CONTROL BEEPS A~ER ENTER~G OVEN ME OR STOP TfME

(continued)

POSSIBLE CAUSE

*Huorescent bulb is loose or defective, Adjust or replace.

●Switch operating light is broken. Cdl for service.

●Improper airJgas ratio in oven+ Adjust oven burner air shutters.

“An odor from the insulation around the oven liner is normal for the first few times the oven is used. This is temporary.

●Oven temperature is too high to set self-claaning operation. Allow the range to cool to room temperamre and reset the controls.

*Door latch handle not moved dl the way to the right.

●Oven must COQ1 below locking temperature clean cycle is complete. Do not lock door with door latch except when using self-clean feature or the oven may lock.

●Oven controls not set properly. Review Operating the Self-Cleaning Oven section. * Heavily soiled ovens require 3~z to 4 hour clean time.

●Heavy spillovers should be cleaned up before starting clean cycle.

●Self-cleaning cycle has been selected but latch hande was not moved all the way to the right. Move the latch handle.

●Latch hande was moved to the right but a program other than self-cleaning was selected. Move the latch handIe to the right only when setting self-cleaning cycle.

●This is reminding you to enter a bake temperature (see Baking section).

If you need more help...call, toll free: GE Answer Centerm

800.626.2000

consumer information service

50