GE JGBP35GEP Seal The Openings, Check Surface Burner Ignition, QuaIi~ of Flames, A Yellow flames

Models: JGBP31GEP JGBP34GEP JGBP35GEP JGBP38GES

1 52
Download 52 pages 30.81 Kb
Page 41
Image 41
❑SEAL THE OPENINGS

SEAL THE OPENINGS

Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.

CHECK SURFACE BURNER IGNITION

Operation of all cooktop and oven burners should be checked after range and gas supply lines have been carefully checked for leaks.

Push in one of the surface burner controls and turn it to the LITE position. You will hear a snapping sound indicating proper operation of the spark module. Once the air has been purged from the supply lines, burner should light within 4 seconds. Afterburner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked.

QuaIi~ of Flames

The combustion quality of burner flames needs to be determined visually.

Uburner flames look like (A), call for service. Normal burner flames should look like (B) or (C), depending on the @pe of gas you use.

With LP gas, some yellow tipping on outer cones is normal.

(A) Yellow flames—

Call for service

(B) Yellow tips on

outer cones—

Normal for LP gas

(C) %ft blue flame- Normal for natural gas

CHECK IGNITION OF OVEN BURNER

The oven is designed to operate quietly and automatically. To operate the oven, press the B~ pad and then press the INCREASE pad until “350°” appears in the display. After 30-90 seconds, the oven burner will ignite and burn until the set temperature is reached. The oven burner will continue to cycle on and off as necessary to maintain the oven at the temperature indicated by the display.

To check ignition of the broil burner, press the BROIL pad and then the INCREASE or DECREASE pad. After 30-90 seconds, the broil burner will ignite.

The oven requires electrical power to operate. In the case of a power outage, the oven burners on these models cannot be lit manually with a match. Gas will not flow unless the glow bar is hot.

If the oven is in use when a power outage occurs, the oven burner shuts off and cannot be re-lit until power is restored.

(continued next page)

41

Page 41
Image 41
GE JGBP35GEP, JGBP38GES Seal The Openings, Check Surface Burner Ignition, QuaIi~ of Flames, Check Ignition Of Oven Burner