208/240V
For improved results when using Bake, the oven can be set from 240V to 208V if your household is on 208V.
To set the oven to 208V:
1.Press SETUP.
2.Use right Quickset pad to scroll to 208/240V.
3.Select 208/240V using the left Quickset pad.
4.Select 208V or 240V using the Quickset pads.
5.Press SETUP to exit the menu.
Tones (beeps)
The number of beeps heard at the end of cooking and at the end of timer operation and their volume can be adjusted.
To change the beeps at the end of cooking:
1.Press SETUP.
2.Use right Quickset pad to scroll to TONES.
3.Select TONES using the left Quickset pad.
4.Use right Quickset pad to scroll to COOK TONE.
5.Select COOK TONE using the left Quickset pad.
6.Use the right Quickset pad to scroll and select:
OR
OR
1 BEEP to hear 1 beep only at the end of cooking.
7.Select the desired beep using the left Quickset pad.
8.Press SETUP to exit.
To change the timer beeps:
1.Press SETUP.
2.Use right Quickset pad to scroll to TONES.
3.Select TONES using the left Quickset pad.
4.Use right Quickset pad to scroll to TIMERS TONES.
5.Select TIMERS TONES using the left Quickset pad.
6.Use the right Quickset pad to scroll and select:
OR
OR
1 BEEP to hear 1 beep only at the end of cooking.
7.Select the desired beep using the left Quickset pad.
8.Press SETUP to exit.
To change the volume of the beeps:
1.Press SETUP.
2.Use right Quickset pad to scroll to TONES.
3.Select TONES using the left Quickset pad.
4.Use right Quickset pad to scroll to VOLUME.
5.Select VOLUME using the left Quickset pad.
6.Use right Quickset pad to scroll and select: HIGH for the highest volume.
OR
MEDIUM for medium volume.
OR
LOW for the lowest volume.
7.Select the desired volume using the left Quickset pad.
8.Press SETUP to exit.
12 HR Shutoff
The oven will automatically turn off at the end of 12 hours if you unintentionally leave it on.
To turn off this feature:
1.Press SETUP.
2.Use right Quickset pad to scroll to 12HR SHUTOFF.
3.Select 12HR SHUTOFF using the left Quickset pad.
4.Select ON or OFF using the Quickset pads.
5.Press SETUP to exit.
Energy Saver
To save energy, the display can be set to go dark if it is not being used.
To set the Energy Saver feature:
1.Press SETUP.
2.Use right Quickset pad to scroll to ENERGY SAVER.
3.Select ENERGY SAVER using the left Quickset pad.
4.Select ON or OFF using the Quickset pads.
5.Press SETUP to exit.
Press any pad to “wake up” the display.
Service
This area of the oven control displays the
1.Press SETUP.
2.Use right Quickset pad to scroll to SERVICE.
3.Select SERVICE using the left Quickset pad to display the number.
4.Press SETUP to exit.
Demo
When Demo is selected, you will see a short presentation highlighting the features of the range.
1.Press SETUP.
2.Use right Quickset pad to scroll to DEMO.
3.Select DEMO using the left Quickset pad.
4.Select ON using the left Quickset pad.
5.Press SETUP to exit.
12