Timer Feature
This feature allows you to program the oven as a kitchen timer. It can also be used to program a standing time after cooking is completed and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1. | • Press Timer. |
2.• Set time, using
5minutes
3.• Press Start.
➤Time will count down without oven
operating.
To Set Stand Time:
Example: To cook at P6 power for 3 minutes, with stand time of 5 minutes.
1.• Enter the desired Power Level (see
page 11 for directions).
Press 5 times
2.• Set cooking time, using
3minutes
3.• Press Timer.
4.• Set stand time, using
Rotate to 5 minutes
5.• Press Start.
➤Cooking will start. After cooking, stand time will count down without oven operating.
CAUTION:
If oven lamp is lit while using the timer feature, the oven is incorrectly programmed. Stop oven immediately and
To Set Delay Start:
Example: To delay the start of cooking for 5 minutes, and cook at P6 power for 3 minutes.
1. | • Press Timer. |
2.• Set delay time, using
5 minutes
3. |
| • Enter the desired Power Level (see |
| ||
|
| page 11 for directions). |
|
|
|
Press 5 times
4.• Set cooking time, using
Rotate to 3 minutes
5.• Press Start.
➤Delay time will count down. Then cooking will start.
NOTE:
1.When each stage finishes, a
2.If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down.
3.Stand time and Delay start cannot be programmed before any automatic Function. This is to prevent the starting tem- perature of food from rising before defrosting or cooking begins. A change in starting temperature could cause inac- curate results.
4.The maximum programmable time of Standing Time, Kitchen Time or Delay Time is up to 99 minutes and 30 sec- onds.
18