Sanyo MDF-793AT, MDF-593AT instruction manual Precautions for Safe Operation, Symbol shows

Page 3

PRECAUTIONS FOR SAFE OPERATION

It is imperative that the user complies with this manual as it contains important safety advice.

Items and procedures are described so that you can use this unit correctly and safely. If the precautions advised are followed, this will prevent possible injury to the user and any other person.

Precautions are illustrated in the following way:

WARNING

Failure to observe WARNING signs could result in a hazard to personnel possibly resulting in serious injury or death.

CAUTION

Failure to observe CAUTION signs could result in injury to personnel and damage to the unit and associated property.

Symbol shows;

this symbol means caution.

this symbol means an action is prohibited.

this symbol means an instruction must be followed.

Be sure to keep this manual in a place accessible to users of this unit.

< Label on the unit >

This mark is labeled on the cover in which the electrical components of high voltage are enclosed to prevent the electric shock.

The cover should be removed by a qualified engineer or a service personnel only.

WARNING

As with any equipment that uses CO2 gas, there is a likelihood of oxygen depletion in the vicinity of the equipment. It is important that you assess the work site to ensure there is suitable and sufficient ventilation. If restricted ventilation is suspected, then other methods of ensuring a safe environment must be considered. These may include atmosphere monitoring and warning devices.

2

Image 3
Contents MDF-593 MDF-593AT MDF-793 MDF-793AT Contents Symbol shows Precautions for Safe OperationPrevent electric shock or injury Maintenance. These may be harmful to your health Water Precautions for Safe Operation Page Page Environmental Conditions Freezer Components Control panel cover LockControl panel Break down or power failure at the power supplyInstallation site InstallationFix the unit InstallationAdjust the leveling foot Remove the packaging materials and tapesSTART-UP of Unit Operation after power failureTemperature setting Remote alarm terminalOperating Instructions Alarm temperature setting Setting of alarm resume time Alarm and safety function Alarm and safety functionsRough scheme Back-up systemTemperature Recorder Feeding of chartReplacement of cell Penholder Setting of back-up temperatureDefrosting of inside wall Routine MaintenanceCleaning Cleaning of condenser filterTrouble Shooting Disposal of Unit Handling of battery Recycle of NICKEL-CADMIUM BatteryLocation of a nickel-cadmium battery Removal of nickel-cadmium batteryPerformance SpecificationsSafety check sheet 7FB6P10140500 25 Feb