FREEZER COMPONENTS
1.Lock
2.Door: Hinged type. The door can be opened in any angle on the way to full open.
3.Magnetic door gasket: Seals the door and prevents leakage of cold air.
4.Inner lid: Serves as a means of reducing cold air leakage when the door is open. Remove the frost before it is accumulated too much.
5.Access port: Serves a means of leading the measuring cable from the freezing room to the outside.
6.Caster: 4 casters are provided. They make the moving of the unit easier.
7.Leveling foot: Serves to adjust the height and to settle the frame.
8.Temperature display area: The digital temperature indicator, alarm lamp, and filter check lamp are installed.
9.Exhaust air vent: Be careful not to block this.
10.Control panel cover
11.Control panel cover lock: To lock the control panel cover to avoid the setting by accidental contact.
12.Control panel: Temperature set key, power switch and so on are installed. AT type has a temperature recorder and switches of
13.
14.Side panel: For cleaning the condenser filter and condenser. The remote alarm terminal is located inside the panel.
15.Air intake vent (grille): Do not block this vent to keep the proper cooling performance.
11