RECYCLE OF NICKEL-CADMIUM BATTERY
廢電池
請回收
The unit contains a rechargeable battery. The battery is recyclable. At the end of it’s useful life, check with you local solid officials option or proper disposal.
＊Label indication is obliged to comply with Taiwanese battery regulation.
Location of a nickel-cadmium battery
This unit is provided a
Removal of nickel-cadmium battery
1.Turn off the power switch and disconnect the power supply plug.
2.As shown in the Fig. 1, remove 4 fixing screws on the front panel and remove the front panel.
3.Remove 4 fixing screws on the control panel and take out the control panel. (Fig. 2)
4.Remove 2 fixing screws on the control box to remove the control box cover. (Fig. 3)
5.Remove 2 screw fixing the clips securing the battery and then disconnect the connector. (Fig. 4)
Handling of battery
Cover the battery terminal with an insulating tape to avoid the short circuit. Then follow the procedure for recycling or proper disposal.
Control box |
| Side Cover |
|
| |
Fig. 1 |
| Fig. 2 |
| Battery |
|
Control box | Clip |
|
|
| |
Fig. 3 | Connecter | Fig. 4 |
| ||
| 26 |
|