Using the water dispenser, Features and Parts List

Using the water dispenser.

GXCF05D Floor model GXCF20E/GXCF20FBB Chiller model

GXCC01D

Countertop model

Features and Parts List

Bottle Support Collar (WS28X10038), grey for models GXCF05D and GXCC01D

Bottle Support Collar (WS28X10036), white for model GXCF20E, (WS28X10035) black for model GXCF20FBB

Separator (WS28X10013) Cold Water Tank

Hot (Red) and Cold (Blue) Power Switches (back of dispenser). The Cold (Blue) power switch also turns on the chiller compartment (on model GXCF20E).

Indicator Lights. The green light will be lit when the dispenser is plugged in. The red and blue lights will cycle on and off while the dispenser heats and cools water. Compressor start delayed by up to 3 minutes.

Hot (Red) and Cold (Blue) Water Dispenser Buttons

Dispenser Drip Tray (WS28X10016) and Grille (WS28X10015), grey for models GXCF05D and GXCC01D

Dispenser Drip Tray (WS28X10026) and Grille (SW28X10027) white for model GXCF20E

Dispenser Drip Tray (WS28X10031) and Grille (WS28X10034) black for model GXCF20FBB

Compartment Tray (model GXCF20E/GXCF20FBB only) (WS29X10029)

Storage Compartment (GXCF05D). Do not use to store foods requiring refrigeration. The compartment is not refrigerated.

Chiller Compartment (GXCF20E). The compartment is intended solely for use in chilling canned and boxed beverages, and packaged nonperishables.

Compartment Shelf (WS28X10028)

Drainage Cap (floor and chiller models) (WS01X10008)

Silicon Stopper (floor and chiller models) (WS01X10007)

Retaining Clip (countertop models) (WS01X10010) Rubber Drain Cover (countertop models) (WS01X10011)

Loading the Dispenser and Start Up

IMPORTANT: Make sure the dispenser is unplugged with both the hot and cold power switches (on the back of the dispenser) set to the O (off) position. Before placing the water bottle on the dispenser, wash hands and wipe the top of the bottle with a clean cloth. Avoid touching the part of the bottle that will be in contact with the water dispenser.

Make sure the water level in the top of the dispenser is low enough to allow for proper bottle installation. Failure to do so may cause the dispenser to overflow.

Sanitize the dispenser water tanks prior to installing a full bottle of water for the first time (see “Cleaning and Sanitizing the Water Tanks”).

1. Peel the label from the top cover of the bottle. Do not remove the entire bottle cap or press in the center plug.

2.Place the bottle on top of the dispenser as shown, aligning the center plug with the probe. Press down until the probe pushes the center plug out of the cap and into the water bottle, allowing the bottle to rest on the support collar. The plug may remain on top of the probe or may be released to float in the water; both conditions are normal.

3.IMPORTANT: Press the hot and cold dispenser buttons until water runs from both taps.

4.Plug in the dispenser.

5.Set the HOT and COLD power switches (located on the top left rear of the dispenser) to the I (on) position.

6.Allow 30 minutes for water to reach hot and cold temperatures.

Contact a local water bottle distributor to purchase water bottles.

GXCF20E, GXCF20FBB specifications

The GE GXCF20E and GXCF20FBB are cutting-edge appliances that embody the perfect fusion of technology, efficiency, and stylish design. These built-in coffee centers are engineered to elevate the coffee brewing experience by offering a range of features that cater to both casual coffee drinkers and connoisseurs alike.

One of the standout features of the GXCF20E and GXCF20FBB is their dual brewing system. Users can brew a full carafe of coffee or a single cup, allowing for flexibility depending on the occasion. This versatility is coupled with a powerful brewing mechanism that ensures optimal flavor extraction, producing rich and aromatic beverages.

Both models are equipped with a built-in grinder, incorporating innovative blade technology that allows coffee enthusiasts to grind beans to their preferred coarseness. This technology enables users to achieve the freshest coffee possible, maximizing flavor and quality. Additionally, the adjustable strength settings allow consumers to customize the intensity of their brew, ensuring a personalized coffee experience.

The GXCF20E and GXCF20FBB also feature smart technology integration. With Wi-Fi connectivity, users can control their coffee maker remotely through a smartphone app. This feature empowers users to schedule brewing times, adjust settings, and access maintenance alerts from anywhere in the home, offering unprecedented convenience.

In terms of design, both models boast a sleek, modern aesthetic that complements any kitchen decor. The intuitive LCD touchscreen interface simplifies operation, making it easy to navigate through various brewing options and settings.

Moreover, energy efficiency is a key characteristic of these models. With eco-friendly modes and automatic shut-off features, users can enjoy their coffee while being mindful of energy consumption.

Safety features, such as a child lock, further enhance the user experience, ensuring peace of mind in a busy household. The GXCF20E and GXCF20FBB are also designed with easy-to-clean components, including a removable drip tray and a brew basket, allowing for hassle-free maintenance and longevity.

In summary, the GE GXCF20E and GXCF20FBB combine advanced technology, user-friendly design, and high-quality brewing capabilities. These built-in coffee centers are a testament to GE's commitment to delivering exceptional products that enhance the everyday lives of coffee lovers worldwide. Whether you're brewing for one or many, these models are sure to excite and satisfy.