GE GXCF20FBB, GXCF20E owner manual Draining the Dispenser, Cleaning the Separator

Page 6

Care and cleaning of the dispenser.

Draining the Dispenser

The dispenser should be drained before cleaning the tanks and before leaving for long vacations or absences.

Drain outlet cap

Floor models

(rear of dispenser)

Floor Models

1.Set both power switches (on the back of the dispenser) in the O (off) position and unplug the dispenser.

2.Remove the water bottle from the dispenser.

3.Put a container that will withstand hot water under the hot water tap. Press the hot dispenser button until the water is cool (about 1 quart). Add water to the cold water reservoir (on top where the bottle supplies water) as needed.

4.Dispense water from both buttons into container(s) until no more water can be dispensed (about 1 quart of water still remains in the dispenser).

5.Place a large bucket beneath the drain outlet on the rear of the dispenser.

6.Using a Phillips screwdriver, loosen the screws on the bracket covering the drain outlet cap. Rotate the bracket out of

the way to allow access to the cap.

7.Remove the cap and silicon stopper from the drain outlet and and allow water to drain. After draining, replace the stopper and cap.

8.Rotate the bracket back into place and tighten screws.

Make sure to install a full bottle and dispense water from the hot water tap before plugging in and turning on the dispenser (see Loading the Dispenser).

Drain cover and

retaining clip

Countertop models (bottom of dispenser)

Countertop Models

1.Set both power switches (on the back of the dispenser) in the O (off) position and unplug the dispenser.

2.Remove the water bottle from the dispenser.

3.Put a container that will withstand hot water under the hot water tap. Press the hot dispenser button until the water is cool (about 1 quart). Add water to the cold water reservoir (on top where the bottle supplies water) as needed.

4.Dispense water from both buttons into container(s) until no more water can be dispensed (about 1 quart of water still remains in the dispenser).

WARNING: Lift the dispenser carefully; it weighs approximately 40 lbs (18 kg). Avoid accidentally pressing the dispenser buttons while lifting or carrying.

5.Place the dispenser over a sink with 3 feet on the counter. Hold or secure the dispenser steady while removing the retaining clip and drain cover. Remove the retaining clip and drain cover from the drain outlet, making sure not to damage the drain cover. Allow water to drain.

6.After draining, replace the drain cover and retaining clip.

Make sure to install a full bottle and dispense water from the hot water tap before plugging in and turning on the dispenser (see Loading the Dispenser).

To remove

To replace

Support collar

Separator

6

Cleaning the Separator

IMPORTANT: Set both power switches (on the back of the dispenser) in the O (off) position and unplug the water dispenser before cleaning.

1.Remove the water bottle and drain the dispenser (see Draining the Dispenser).

2.Remove the support collar by turning counterclockwise and pulling straight off.

3.Remove the plastic separator by pulling straight out (you may need to twist slightly to loosen).

4.Clean the separator with dish soap and water or in the top rack of the dishwasher.

5.Dry the separator thoroughly on both sides.

6.Using a clean cloth or paper towel, thoroughly dry the cold water reservoir.

7.Place the separator back in the dispenser. Make sure the long, tapered end of the separator is positioned firmly on the metal plug on the bottom of the reservoir.

8.Replace the support collar and turn clockwise until it is firmly in place.

9.Install a full water bottle on the dispenser (see Loading the Dispenser).

Page 5 Page 7
Image 6
Page 5 Page 7
Contents La section française commence à la La sección en español empieza en la páginaSafety Precautions Proper Installation and LocationGrounding Instructions Proper Disposal of the Water DispenserRefrigerant Disposal Loading the Dispenser and Start Up Using the water dispenserFeatures and Parts List Hot Red and Cold Blue Water Dispenser ButtonsUnplug the dispenser before cleaning Care and cleaning of the dispenserChild Safeguard Cleaning the Drip Tray and GrilleCleaning the Separator Draining the DispenserAfter draining, replace the drain cover and retaining clip To defrost Sanitizing and Cleaning the Water TanksRinse out the bleach solution After defrostingTroubleshooting Tips SpecificationsPreparing for Vacation Vibration or rattling When door is opened Chiller models onlyChiller models only Slight vibrationBonne Installation ET BON Entretien Précautions DE SécuritéInstructions DE Mise À LA Terre Bonne Mise AU Rebut DU Distributeur D’EAUDisposition du réfrigérant Boutons de distribution d’eau chaude rouge et froide bleu Utilisation du distributeur d’eauCaractéristiques et liste de pièces Bride de retenue modèle de comptoir WS01X10010Entretien et nettoyage du distributeur Chargement du distributeurSauvegarde pour la protection des enfants Modèles sur pied Vidange du distributeurTiroir de condensation et grille Modèles de comptoirDésinfection et nettoyage des réservoirs d’eau Rinçage de la solution d’eau de JavelNettoyage du séparateur Pour désinfecterCaractéristiques techniques Conseils de dépannagePréparation au départ en vacances Problème Cause possible Que faireUniquement Est alluméLégères sont normales Le compresseur/moteur ModèlesStudio de Design pour la Vraie Vie Pièces et accessoiresSoutien au consommateur Site Internet GE Appliances Contactez nousPrecauciones DE Seguridad Instalación Apropiada Y LocalizaciónInstrucciones Para Conexión a Tierra Cómo Eliminar SU Dispensador DE Agua DE Forma ApropiadaDeshacerse del refrigerante Cómo utilizar el dispensador de agua Lista de partes y característicasCuidado y limpieza del dispensador Cómo cargar el dispensadorSeguro contra niños Modelos de piso Cómo drenar el dispensadorCómo limpiar la bandeja de goteo y parrilla Modelos de encimeraPara retirar los depósitos de minerales Cómo desinfectar y limpiar los tanques de aguaPara desinfectar La instalación por primera vez, ignore los pasosPreparándose para las vacaciones Solucionar problemasProblema Posibles causas Qué hacer EspecificacionesCon enfriador únicamente Un olor acre en el aireAlrededor del dispensador Ibración ligera es normalServicio al consumidor Página Web de GE Appliances Piezas y accesoriosPóngase en contacto con nosotros Parts and Accessories Contact Us

GXCF20E, GXCF20FBB specifications

The GE GXCF20E and GXCF20FBB are cutting-edge appliances that embody the perfect fusion of technology, efficiency, and stylish design. These built-in coffee centers are engineered to elevate the coffee brewing experience by offering a range of features that cater to both casual coffee drinkers and connoisseurs alike.

One of the standout features of the GXCF20E and GXCF20FBB is their dual brewing system. Users can brew a full carafe of coffee or a single cup, allowing for flexibility depending on the occasion. This versatility is coupled with a powerful brewing mechanism that ensures optimal flavor extraction, producing rich and aromatic beverages.

Both models are equipped with a built-in grinder, incorporating innovative blade technology that allows coffee enthusiasts to grind beans to their preferred coarseness. This technology enables users to achieve the freshest coffee possible, maximizing flavor and quality. Additionally, the adjustable strength settings allow consumers to customize the intensity of their brew, ensuring a personalized coffee experience.

The GXCF20E and GXCF20FBB also feature smart technology integration. With Wi-Fi connectivity, users can control their coffee maker remotely through a smartphone app. This feature empowers users to schedule brewing times, adjust settings, and access maintenance alerts from anywhere in the home, offering unprecedented convenience.

In terms of design, both models boast a sleek, modern aesthetic that complements any kitchen decor. The intuitive LCD touchscreen interface simplifies operation, making it easy to navigate through various brewing options and settings.

Moreover, energy efficiency is a key characteristic of these models. With eco-friendly modes and automatic shut-off features, users can enjoy their coffee while being mindful of energy consumption.

Safety features, such as a child lock, further enhance the user experience, ensuring peace of mind in a busy household. The GXCF20E and GXCF20FBB are also designed with easy-to-clean components, including a removable drip tray and a brew basket, allowing for hassle-free maintenance and longevity.

In summary, the GE GXCF20E and GXCF20FBB combine advanced technology, user-friendly design, and high-quality brewing capabilities. These built-in coffee centers are a testament to GE's commitment to delivering exceptional products that enhance the everyday lives of coffee lovers worldwide. Whether you're brewing for one or many, these models are sure to excite and satisfy.
Top Page Image Contents