Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Drain Hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance (see fig.2). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making it level. In any case, the appliance should not be inclined more than 2. If the appli- ance is level, it will help ensure proper performance.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas) con- nector and make sure that it is fastened tightly in place (see fig.1). If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Fig.1

fig.2

Attention:

The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety re- quirement mandated by law).

If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adaptors or the like as they could cause overheating and burns.

The symbol on the product or on its packag-

ing indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could other- wise be caused by inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

.10.

DW9-AFM, DW9-AFM ME, DW9-AFMS specifications

Haier is a renowned name in home appliances, and the DW9-AFMS, DW9-AFM ME, and DW9-AFM dishwashers are a testament to the brand's commitment to quality and innovation. These models combine sleek design with powerful performance, catering to the needs of modern households.

One of the standout features of the DW9 series is its impressive capacity. With the ability to accommodate up to 16 place settings, these dishwashers are perfect for families or those who frequently entertain guests. The adjustable racking system allows for flexible loading, enabling users to arrange their dishes comfortably and efficiently. This adaptability ensures that users can maximize space while still achieving optimal cleaning results.

The technology integrated into the DW9-AFMS, DW9-AFM ME, and DW9-AFM models significantly enhances their performance. The advanced wash system utilizes powerful jets and multiple spray levels to ensure that every dish is thoroughly cleaned, even in hard-to-reach areas. The high-temperature wash option is particularly effective for sanitizing nursery items and cutting boards, giving users peace of mind regarding hygiene.

Energy efficiency is a hallmark of the DW9 series. Equipped with eco-friendly features, these dishwashers offer excellent cleaning performance while minimizing water and energy consumption. This not only lowers utility bills but also aligns with the increasing demand for environmentally responsible appliances.

Noise levels are another critical consideration for homeowners, and Haier has addressed this with the DW9 series. These dishwashers operate quietly, thanks to sound-dampening technology, which makes them suitable for open-concept living spaces without disturbing daily activities.

The user-friendly interface of the DW9 dishwashers includes a range of wash programs tailored to different needs, from quick washes to intensive cycles for heavily soiled pots and pans. The intuitive controls simplify operation, allowing users to select the desired program with ease.

In summary, Haier's DW9-AFMS, DW9-AFM ME, and DW9-AFM dishwashers are exemplary models that combine efficiency, advanced technology, and large capacity. They are designed to meet the demands of modern living while ensuring optimal performance, making them a valuable addition to any kitchen. These dishwashers reflect Haier's ethos of creating practical yet innovative home appliances that enhance the user experience and contribute to a cleaner, more convenient lifestyle.