Henny Penny 592, 590 manual Nylatron Strips Replacement

Page 25

Model 590/592

2-23. NYLATRON STRIPS REPLACEMENT (Continued

9. Lift the front shroud up and out, over the arm of the lid.

10. Thread the new nylatron strip through the track in the front shroud.

11. Lining up the holes in the strips, ﬁt the front shroud back over the lid arms.

12. Secure the strips to the weight assembly.

13. Replace back shroud, top cap, and lid, and replacement is complete.

1103

2-25

Image 25

Contents Maintenance Hints MaintenanceIntroduction PreventiveCheckout High Temperature Fuse Holders Limit ControlReplacement Excess force will damage temperature probe Temperature Probe ReplacementYearly Inspection Every 90 daysReversing the LID UprightGasket Model 590/592 Pressure pads are plastic strips that the lid cam presses Pressure PADAgainst to seal the lid LID Adjustment Solenoid Valve If the core-disc assembly is sticking due to buildup Solenoid Valve Deadweight ValveRemoval & Cleaning Safety Relief Valve Deadweight ValveValve Cleaning StepsPressure Gauge Calibration Steps30 31 34 35 ContactorsIf either contactor proves defective, replace as follows Amperage Wires PowerHeating Elements Heating Elements 4 mm Gap Drain Valve Drain valve opens when the drain valve handle is pulledExtension Out and drains the shortening out of the potNylatron Strips Replacement Nylatron Strips Replacement