Ice-O-Matic GEM0650A/W GEM0650/0956/1256 A/W, Forward, Keep this manual for future reference

Page 3

GEM0650/0956/1256 A/W

Forward

How To Use This Manual

ICE-O-Matic provides this manual as an aid to the end user and service technician in installation and maintenance of the GEM Series ice machines. Do not attempt to perform installation, start-up or maintenance unless you have read and fully understand this manual.

If, at any time, you encounter conditions that are not addressed in this manual, call, E-mail or write the ICE-O- Matic Service Department:

ICE-O-Matic

11100 E. 45th Ave.

Denver, Co. 80239

Attn: Technical Service Department

E-Mail: Tech.service@iceomatic.com

Telephone Numbers		Any Service communication must include:
800-423-3367	All Departments	• Model Number
888-349-4423	Technical Assistance Only	• Serial number
303-371-3737		• A detailed explanation of the problem

Keep this manual for future reference.

The GEM0650A/W, GEM0956A/W and GEM1256A/W Series Service Parts Manuals are available separately.

ICE-O-Matic icemakers and dispensers are not approved for outdoor installation.

WARNING: Always disconnect electrical power and shut off water supply whenever maintenance or repairs are performed on the ice machine and related equipment.

CAUTION: Always wear protective eyewear whenever maintenance or repairs are performed on the ice machine and related equipment

Page i

Image 3

Contents SERVICE AND INSTALLATION MANUAL GEM0650A/W,GEM0956A/W and GEM1256A/WGEM0655 Air Page Page GEM0650/0956/1256 A/WForward Keep this manual for future referenceTable of Contents Table Of ContentsConcealed Loss or Damage Freight Claim ProcedureInspect Promptly Visible Loss or DamageFiling a Claim WarrantyICE-O-Matic Limitation of WarrantyAdjustments For the InstallerInstallation Guidelines Electrical SpecificationsGEM0650/0655/0956A/W For The InstallerGEM1256A/W Bin Application Ice Machine SpecificationsWater Limitations LocationStorage Bin Ice machineGEM 0650/0956/1256 A/W AIR COOLED MODELS For the PlumberWater Inlet WATER COOLED MODELSAir Cooled Models For the ElectricianElectrical Connections Water Cooled ModelsFinal Check List GEM0650/0956/1256A/WStart Up Pre-StartInspectionStart Up Air Cooled Model Shown Component DescriptionGEM0650/0956/1256 A/W Component Description Evaporator Motor Water Seal Ice Sweep Bearing Breaker/Divider AugerShut Down To ResetElectrical Sequence Electrical SequenceWater System Operation WaterTypical Low Side Pressure High Pressure Cut Out- Automatic ResetLow Pressure Cut Out- Automatic Reset Operation: PerformanceKEEP OUT OF THE REACH OF CHILDREN Sanitizing and CleaningICE MAKING SYSTEM: In place cleaning scheduled at a minimum of twice a yearBearing Maintenance Bearing MaintenanceNote Left Hand Threads Sensor Maintenance Bin Control SensorWater Sensor GEM0650 Maintenance Air CooledClean the air cooled condenser GEM09562. Turn off the water supply to the ice machine Auger Maintenance1. Disconnect electrical power to the ice machine AugerProbable Correction Service DiagnosisSymptom Possible CausePossible Cause 4.High pressure cut out check Control System DiagnosticsR&R- Water Reservoir, Bin Control Water ReservoirBin Controls Ice Level Sensors R&R-Bearingand Breaker To Remove the Breaker Bearing AssemblyTo Remove the Auger R&R-AugerTo Replace the Water Seal R&R-WaterSealTo Remove the Water Seal Removal of the Water SealR&R-Evaporator To Replace the EvaporatorTo Reassemble the Evaporator and Auger To Inspect the Gear Motor To Remove and Repair the Gear Motor AssemblyR&R-GearMotor To Check the Gear MotorR&R-FanBlade and Motor Instructions for Liquid Charging R404A Refrigeration ServiceWiring Diagram GEM0650 A/W GEM0650 Wiring DiagramWiring Diagram GEM0956 A/W GEM0956 Wiring DiagramWiring Diagram GEM1256 A/W GEM1256 Wiring DiagramWiring Diagram GEM0655 Air GEM0655 Wiring DiagramWhat to Do Before Calling for Service Service History