Ice-O-Matic GEM0956A/W Freight Claim Procedure, Inspect Promptly, Visible Loss or Damage, Page

Page 5

GEM0650/0956/1256 A/W

Freight Claim Procedure

Important!

Inspect Promptly

This merchandise has been carefully inspected and packed in accordance with the carrier’s packing specifications. Responsibility for safe delivery has been assumed by the carrier. If loss or damage occurs, you as the consignee must file a claim with the carrier and hold the container for carrier’s inspection.

Visible Loss or Damage

Any external evidence of loss or damage must be fully described and noted on your freight bill or express receipt and signed by the carrier’s agent. Claim should be filed on a form available from the carrier.

Concealed Loss or Damage

If loss or damage does not appear until merchandise has been unpacked, make a written request for inspection by the carrier within 15 days of the delivery date. Then file a claim on a form from the carrier.

File Claim Without Delay Do Not Return Damaged Merchandise to ICE-O-Matic

Page iii

Image 5

Contents GEM0655 Air SERVICE AND INSTALLATION MANUALGEM0650A/W,GEM0956A/W and GEM1256A/W Page Forward GEM0650/0956/1256 A/WKeep this manual for future reference PageTable of Contents Table Of ContentsInspect Promptly Freight Claim ProcedureVisible Loss or Damage Concealed Loss or DamageICE-O-Matic WarrantyLimitation of Warranty Filing a ClaimInstallation Guidelines For the InstallerElectrical Specifications AdjustmentsGEM0650/0655/0956A/W For The InstallerGEM1256A/W Bin Application Ice Machine SpecificationsStorage Bin LocationIce machine Water LimitationsGEM 0650/0956/1256 A/W Water Inlet For the PlumberWATER COOLED MODELS AIR COOLED MODELSElectrical Connections For the ElectricianWater Cooled Models Air Cooled ModelsFinal Check List GEM0650/0956/1256A/WStart Up Start UpPre-StartInspection Air Cooled Model Shown Component DescriptionGEM0650/0956/1256 A/W Component Description Evaporator Motor Water Seal Ice Sweep Bearing Breaker/Divider AugerElectrical Sequence To ResetElectrical Sequence Shut DownWater System Operation WaterLow Pressure Cut Out- Automatic Reset High Pressure Cut Out- Automatic ResetOperation: Performance Typical Low Side PressureICE MAKING SYSTEM: In place cleaning Sanitizing and Cleaningscheduled at a minimum of twice a year KEEP OUT OF THE REACH OF CHILDRENNote Left Hand Threads Bearing MaintenanceBearing Maintenance Water Sensor Sensor MaintenanceBin Control Sensor Clean the air cooled condenser Maintenance Air CooledGEM0956 GEM06501. Disconnect electrical power to the ice machine Auger MaintenanceAuger 2. Turn off the water supply to the ice machineSymptom Service DiagnosisPossible Cause Probable CorrectionSymptom 4.High pressure cut out check Control System DiagnosticsBin Controls Ice Level Sensors R&R- Water Reservoir, Bin ControlWater Reservoir R&R-Bearingand Breaker To Remove the Breaker Bearing AssemblyTo Remove the Auger R&R-AugerTo Remove the Water Seal R&R-WaterSealRemoval of the Water Seal To Replace the Water SealTo Reassemble the Evaporator and Auger R&R-EvaporatorTo Replace the Evaporator R&R-GearMotor To Remove and Repair the Gear Motor AssemblyTo Check the Gear Motor To Inspect the Gear MotorR&R-FanBlade and Motor Instructions for Liquid Charging R404A Refrigeration ServiceWiring Diagram GEM0650 A/W GEM0650 Wiring DiagramWiring Diagram GEM0956 A/W GEM0956 Wiring DiagramWiring Diagram GEM1256 A/W GEM1256 Wiring DiagramWiring Diagram GEM0655 Air GEM0655 Wiring DiagramWhat to Do Before Calling for Service Service History