Miele G 7825, G 7826 manual Cleaning and Care, Cleaning the filters in the wash cabinet

Page 33

Cleaning and Care

Cleaning the filters in the wash cabinet

,The machine must not be used without all the filters in place.

The filter combination in the base of the wash cabinet should be inspected regularly and cleaned if necessary.

Cleaning the fine filter

^Remove the fine filter and clean if necessary.

Cleaning the flat filter

^Remove the flat filter and clean if necessary.

Cleaning the filter system for the circulation pump

Two filters are situated under the flat filter (on the right next to the heater block) for the protection of the circulation pump.

^Pull the filters up and out of the holder to remove. Clean if necessary.

^Replace the filter combination in the reverse order.

33

Image 33
Contents Medium capacity Glassware Washer G 7825 / G Page Contents Contents Use Important Safety InstructionsImportant Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessoriesOptions Description of the machineElectronic controls Guide to the machineDisplay Door switch h Start buttonOn/Off button Cursor left Cursor rightUnclean side Guide to the machine Clean side G 7826 only Opening and closing the door Opening the doorTo close the door Mobile unit coding Automatic mobile unit recognition AWKMobile unit coding strip Setting mobile unit codingSet the program place coding Applications Preparing items for cleaningLoading the machine Removing excess soilsApplications Injector mobile unit Laboratory glassware LGTransfer cart for loading and unloading the machine Applications Adding of liquid detergents and neutralizers Priming the DOS dispensersAdditional DOS modules optional Adding of liquid detergents and neutralizers Priming the liquid dispensing systems Dispensing system maintenanceExternal Dispensing systems OptionalOperation Power switchTurning on To change the operating levelStarting a program Fixed programFree program selection Program sequence Turning offAutomatic mobile unit recognition AWK To change or cancel a program Operating levels B or DOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the fine filter Cleaning the flat filterDrying unit TA Cleaning and care Changing the coarse filterChanging the fine filter Maintenance of report printer Option Replacing the print paperReplacing the ribbon cartridge Steam/Electro or Electro/Steam conversion InstallationElectrical connection Water connection PlumbingDo not shorten hoses Hot water connectionDrainage Technical Data After sales service Caring for the environment Disposal of the packing materialsDisposal of an old appliance Page All rights reserved