Miele G 7826, G 7825 manual Serial interface

Page 32

Serial interface

Each machine is supplied with a 5 m long interface cable for data transfer between the Profitronic system and an external report printer or PC.

The interface cable is rolled up inside the machine and must only be connected by a Miele Service Technician.

The serial interface is RS 232 compatible.

Various printers can be used as external printers:

–Epson-compatible sign-set

–HP Laserjet

For the interface configurations see "PC/Printer Function" in the "Programming Manual".

The address of the 9-pole pin sub-D plug of the serial interface cable: 5GND (ground)

3TXD (transmit) 2RXD (receive)

1-4-6 (linked)

7-8 (linked)

A standard null-modem or laplink cable can be connected.

The extension cable to the printer/PC must not exceed 32 ft. (10 m).

Please note the following when connecting a printer or PC:

–Only use an industry-standard PC or printer.

–When installing the machine take the dimensions of the printer/PC into account.

The printer settings are described in the chapter PC/Printer function in the program manual.

The report printer offers the following print options:

–Program print

–Additional functions print

–Rinse protocol print

–Fault protocol print

32

Image 32

Contents Medium capacity Glassware Washer G 7825 / G Page Contents Contents Important Safety Instructions UseImportant Safety Instructions Important Safety Instructions Using accessories Disposal of an old applianceDescription of the machine OptionsGuide to the machine Electronic controlsDoor switch h Start button DisplayOn/Off button Cursor left Cursor rightUnclean side Guide to the machine Clean side G 7826 only To close the door Opening and closing the doorOpening the door Automatic mobile unit recognition AWK Mobile unit codingSetting mobile unit coding Mobile unit coding stripSet the program place coding Preparing items for cleaning ApplicationsLoading the machine Removing excess soilsApplications Laboratory glassware LG Injector mobile unitTransfer cart for loading and unloading the machine Applications Additional DOS modules optional Adding of liquid detergents and neutralizersPriming the DOS dispensers Adding of liquid detergents and neutralizers Dispensing system maintenance Priming the liquid dispensing systemsExternal Dispensing systems OptionalPower switch OperationTurning on To change the operating levelFree program selection Starting a programFixed program Automatic mobile unit recognition AWK Program sequenceTurning off Operating levels a or C To change or cancel a programOperating levels B or D Cancelling a program Serial interface Cleaning and Care Cleaning the filters in the wash cabinetCleaning the fine filter Cleaning the flat filterChanging the fine filter Drying unit TA Cleaning and careChanging the coarse filter Replacing the ribbon cartridge Maintenance of report printer OptionReplacing the print paper Installation Steam/Electro or Electro/Steam conversionElectrical connection Plumbing Water connectionDo not shorten hoses Hot water connectionDrainage Technical Data After sales service Disposal of an old appliance Caring for the environmentDisposal of the packing materials Page All rights reserved