Adding of liquid detergents and neutralizers
,Use only cleaning agents specially designed for lab washers and regard the application recommendations of the manufacturer!
This machine is fitted with 2 dispensers as standard:
–Dispensing system DOS 1 (blue) to dispense liquid cleaning detergents. The dosing rate is 120 ml/min.
–Dispensing system DOS 3 (white) to dispense neutralizing agent (acid). The dosing rate is 20 ml/min.
Additional DOS modules (optional):
–Dispensing system DOS 2 (white). The dosing rate is 20 ml/min.
–Dispensing system DOS 4 (green). The dosing rate is 120 ml/min.
The amounts of detergent and neutralizers required, depending on the application chosen for this machine, are dispensed through these dispensing systems.
Priming the DOS dispensers
The liquids can be filled into 10 l plastic containers, which are color coded for the corresponding dispensing system.
When first commissioning, or when the message “FILL DOS 1 CONTAINER" and/or DOS 2, 3, 4 flashes in the display after switching on or at the end of a program, fill the storage container with the correct agent.
If the message "CHECK DISPENSING SYSTEM 1" and/or “DISPENSING SYSTEM 2, 3, 4" flashes in the display, (the program has been automatically put on hold), check and the storage container and the dispensing hoses and refill if necessary.
When first commissioning or when the message “CHECK DISPENSING SYSTEM... " appears start the
,Exercise caution when handling detergents!
Follow the instructions and relevant safety procedures carefully.
Wear protective gloves and goggles.
24