Maintenance of report printer (Option)
Replacing the print paper
Replace the print paper (58 mm wide) when the red indicator lights up in the report printer.
^Open and pull down the front panel of the printer.
^Take the empty roll together with its spindle from the roll holder, fit the new roll on the spindle and put back in place.
^Cut the paper at an angle and guide it up over the paper transport roller (slit behind the ribbon cartridge). Press the green paper transport button until the paper reemerges above the ribbon cartridge (see the illustration on the inside of the front panel).
^Guide the paper through the slit of the front panel. Shut the front panel.
Replacement paper rolls (58 mm wide, outer diameter approx. 50 mm) can be obtained from the Miele.
Replacing the ribbon cartridge
^Open and pull down the printer front panel.
^Pull the ribbon cartridge (above the paper roll) forward and out of its holder and replace it with a new one. The paper must be guided between the ribbon and the cartridge housing.
^Turn the small wheel for manual ribbon transport on the right clockwise until the ribbon is tight.
^Cut the paper at an angle and guide it through the slit of the front panel. Shut the front panel.
,Please refer to the installation diagram supplied with the machine.
Replacement ribbon cartridges can be obtained from the Miele.
35