Miele Cleaning and Care for Dishwashers: G 7825 and G 7826 Manual

Page 34

Drying unit (TA) - Cleaning and care

Changing the coarse filter

The coarse filter should be changed when the message "CHANGE TA COARSE" flashes in the display.

After the coarse filter has been changed set the filter timer to zero, as follows:

^Select CHANGE TA COARSE.

^Press the "Start" 6 button.

When the service program has ended, a message appears in the display.

^Confirm the instruction >CONTINUE< with 6.

Changing the fine filter

When the message "CHANGE TA FINE" flashes in the display the fine particle filter must be changed.

After the fine filter has been changed set the filter timer to zero, as follows:

^Select CHANGE TA FINE.

^Press the "Start" 6 button.

When the service program has ended, a message appears in the display.

^Confirm the instruction >CONTINUE< with 6.

Only use Miele S-class particle filters to ensure a faultless operation of the machine.

The service programs CHANGE TA - COARSE and FINE were set by default to program places 62 and 63, but they can be moved to other program places. See "System functions" in the Programming Manual.

34

Image 34

Contents Medium capacity Glassware Washer G 7825 / G Page Contents Contents Important Safety Instructions UseImportant Safety Instructions Important Safety Instructions Using accessories Disposal of an old applianceDescription of the machine OptionsGuide to the machine Electronic controlsOn/Off button Cursor left Door switch h Start buttonDisplay Cursor rightUnclean side Guide to the machine Clean side G 7826 only Opening the door Opening and closing the doorTo close the door Automatic mobile unit recognition AWK Mobile unit codingSetting mobile unit coding Mobile unit coding stripSet the program place coding Loading the machine Preparing items for cleaningApplications Removing excess soilsApplications Laboratory glassware LG Injector mobile unitTransfer cart for loading and unloading the machine Applications Priming the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Adding of liquid detergents and neutralizers External Dispensing systems Dispensing system maintenancePriming the liquid dispensing systems OptionalTurning on Power switchOperation To change the operating levelFixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the fine filter Cleaning and CareCleaning the filters in the wash cabinet Cleaning the flat filterChanging the coarse filter Drying unit TA Cleaning and careChanging the fine filter Replacing the print paper Maintenance of report printer OptionReplacing the ribbon cartridge Installation Steam/Electro or Electro/Steam conversionElectrical connection Do not shorten hoses PlumbingWater connection Hot water connectionDrainage Technical Data After sales service Disposal of the packing materials Caring for the environmentDisposal of an old appliance Page All rights reserved