Miele G 7825, G 7826 manual Drainage

Page 39

Plumbing

Drainage

Connection to the drainage system and disposal of waste water must comply with local and national regulations.

^The machine comes standard with 3

drain hoses. Two have a 7/8" (22 mm) outer diameter and one has a 3/8"

(9.5 mm) outer diameter, all are 5 ft.

(152 cm) long. An additional, 1/2" (13 mm) internal diameter, drain hose is supplied if equipped with the optional steam condenser.

^A 2 1/2" (64 mm) diameter standpipe or floor drain is required.

^The drainage system is fitted with a non-return valve which prevents dirty water from flowing back into the machine via the drain hose.

^The machine should preferably be connected to a separate drainage system onsite.

If separate drainage is not available, contact your Miele application specialist for advice.

^A longer drain hose, up to 12 feet (4 m) long, is available to order from Miele.

^The drainage system must not exceed 12 feet (4 m).

39

Image 39
Contents Medium capacity Glassware Washer G 7825 / G Page Contents Contents Use Important Safety InstructionsImportant Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessoriesOptions Description of the machineElectronic controls Guide to the machineCursor right Door switch h Start buttonDisplay On/Off button Cursor leftUnclean side Guide to the machine Clean side G 7826 only Opening and closing the door Opening the doorTo close the door Mobile unit coding Automatic mobile unit recognition AWKMobile unit coding strip Setting mobile unit codingSet the program place coding Removing excess soils Preparing items for cleaningApplications Loading the machineApplications Injector mobile unit Laboratory glassware LGTransfer cart for loading and unloading the machine Applications Adding of liquid detergents and neutralizers Priming the DOS dispensersAdditional DOS modules optional Adding of liquid detergents and neutralizers Optional Dispensing system maintenancePriming the liquid dispensing systems External Dispensing systemsTo change the operating level Power switchOperation Turning onStarting a program Fixed programFree program selection Program sequence Turning offAutomatic mobile unit recognition AWK To change or cancel a program Operating levels B or DOperating levels a or C Cancelling a program Serial interface Cleaning the flat filter Cleaning and CareCleaning the filters in the wash cabinet Cleaning the fine filterDrying unit TA Cleaning and care Changing the coarse filterChanging the fine filter Maintenance of report printer Option Replacing the print paperReplacing the ribbon cartridge Steam/Electro or Electro/Steam conversion InstallationElectrical connection Hot water connection PlumbingWater connection Do not shorten hosesDrainage Technical Data After sales service Caring for the environment Disposal of the packing materialsDisposal of an old appliance Page All rights reserved