Miele G 7825, G 7826 manual Opening and closing the door, Opening the door, To close the door

Page 15

Opening and closing the door

The door can only be opened when:

–the lab glassware washer is connected to the electrical supply,

–the red (“emergency cut-off") power switch is in the I-ONposition,

–the I-0On-Off button is pressed in, and

–no program is running.

The door on the clean side (G 7826) can only be opened when:

–DESIN (disinfection) programs have been correctly completed.

or

–the “Door locking" function is active (see “Machine function - Door locking" in the “Programming Manual").

Opening the door

^Press the 5 door button, hold the door handle and open the door.

,Do not touch the heating elements (under the wide area filter) during or directly after the end of a program, you could burn yourself. If the boiler has been programmed to “BOILER READY", be particularly careful of hot water and steam when opening the door. Danger of burning or scalding. The water inlet pipe to the wash cabinet is located, as viewed from the unclean side, underneath the basket runner on the left hand side.

To close the door

^Lift the door upwards and push until it clicks shut.

15

Image 15

Contents Medium capacity Glassware Washer G 7825 / G Page Contents Contents Use Important Safety InstructionsImportant Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessoriesOptions Description of the machineElectronic controls Guide to the machineCursor right Door switch h Start buttonDisplay On/Off button Cursor leftUnclean side Guide to the machine Clean side G 7826 only Opening and closing the door Opening the doorTo close the door Mobile unit coding Automatic mobile unit recognition AWKMobile unit coding strip Setting mobile unit codingSet the program place coding Removing excess soils Preparing items for cleaningApplications Loading the machineApplications Injector mobile unit Laboratory glassware LGTransfer cart for loading and unloading the machine Applications Adding of liquid detergents and neutralizers Priming the DOS dispensersAdditional DOS modules optional Adding of liquid detergents and neutralizers Optional Dispensing system maintenancePriming the liquid dispensing systems External Dispensing systemsTo change the operating level Power switchOperation Turning onStarting a program Fixed programFree program selection Program sequence Turning offAutomatic mobile unit recognition AWK To change or cancel a program Operating levels B or DOperating levels a or C Cancelling a program Serial interface Cleaning the flat filter Cleaning and CareCleaning the filters in the wash cabinet Cleaning the fine filterDrying unit TA Cleaning and care Changing the coarse filterChanging the fine filter Maintenance of report printer Option Replacing the print paperReplacing the ribbon cartridge Steam/Electro or Electro/Steam conversion InstallationElectrical connection Hot water connection PlumbingWater connection Do not shorten hosesDrainage Technical Data After sales service Caring for the environment Disposal of the packing materialsDisposal of an old appliance Page All rights reserved