Miele G 7826, G 7825 manual Important Safety Instructions

Page 6

IMPORTANT SAFETY INSTRUCTIONS

Take care when handling liquids such as detergents, neutralizing

agents, wetting agents and rinse aids. These may contain irritant or corrosive ingredients, acids or alkalis. Never use any organic solvent, as the danger of an explosion exists. Wear protective gloves and goggles. The manufacturer’s safety conditions must be observed at all times.

The water in the machine must not be used as drinking water.

Be careful when sorting items with sharp pointed ends. Position them

in the machine that you do not hurt yourself or create danger for other operators.

When using this machine regard the high temperatures and be

especially careful not to scald or burn yourself. When opening the door bypassing the electrical lock, a danger of burning, scalding or corrosion exists. Let mobile units, inserts and cleaned items cool before touching them. Any water which may remain in containers will be very hot and must be emptied into the wash cabinet.

After drying with the TA drying unit open the door to allow the items

and inserts to cool.

Do not touch the heating elements (under the wide area filter) during

or directly after the end of a program, you could burn yourself. They remain hot for some time after the end of the program.

If the boiler has been programmed to "BOILER READY", be particularly

careful of hot water and steam when opening the door. Danger of burning or scalding. The water inlet pipe to the wash cabinet is located, as viewed from the unclean side, underneath the basket runner on the left hand side.

Steam heating is permissible up to a pressure of 145 psi. This

corresponds to a water steam temperature of 179 °C.

Never clean the machine near or with a water or high pressure hose.

Before servicing, disconnect the power supply by either removing

the fuse, unplugging the unit or manually "tripping" the circuit breaker.

,Mount on non-combustible floor only!

6

Image 6
Contents Medium capacity Glassware Washer G 7825 / G Page Contents Contents Important Safety Instructions UseImportant Safety Instructions Important Safety Instructions Using accessories Disposal of an old applianceDescription of the machine OptionsGuide to the machine Electronic controlsOn/Off button Cursor left Door switch h Start buttonDisplay Cursor rightUnclean side Guide to the machine Clean side G 7826 only Opening and closing the door Opening the doorTo close the door Automatic mobile unit recognition AWK Mobile unit codingSetting mobile unit coding Mobile unit coding stripSet the program place coding Loading the machine Preparing items for cleaningApplications Removing excess soilsApplications Laboratory glassware LG Injector mobile unitTransfer cart for loading and unloading the machine Applications Adding of liquid detergents and neutralizers Priming the DOS dispensersAdditional DOS modules optional Adding of liquid detergents and neutralizers External Dispensing systems Dispensing system maintenancePriming the liquid dispensing systems OptionalTurning on Power switchOperation To change the operating levelStarting a program Fixed programFree program selection Program sequence Turning offAutomatic mobile unit recognition AWK To change or cancel a program Operating levels B or DOperating levels a or C Cancelling a program Serial interface Cleaning the fine filter Cleaning and CareCleaning the filters in the wash cabinet Cleaning the flat filterDrying unit TA Cleaning and care Changing the coarse filterChanging the fine filter Maintenance of report printer Option Replacing the print paperReplacing the ribbon cartridge Installation Steam/Electro or Electro/Steam conversionElectrical connection Do not shorten hoses PlumbingWater connection Hot water connectionDrainage Technical Data After sales service Caring for the environment Disposal of the packing materialsDisposal of an old appliance Page All rights reserved