Vulcan-Hart GRD65 ML-052082, GRD85 ML-052306, GRC85 ML-052307, GRC45F ML-12 General, Specifications

Page 5

INSTALLATION, OPERATION AND CARE OF MODELS GRD AND GRC SERIES GAS FRYERS

PLEASE KEEP THIS MANUAL FOR FUTURE USE

GENERAL

Vulcan GRD and GRC Series Gas Fryers are produced with quality workmanship and material. Proper installation, usage and maintenance of your fryer will result in many years of satisfactory performance.

It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided.

The Mobile Filter is covered in a separate instruction manual. Fryers equipped with the KleenScreen filtering system are covered in the Vulcan KleenScreen Filtration System User's Guide. Follow the instructions in the appropriate manual for filtering, draining and dumping shortening.

Vulcan GRD and GRC Series Gas Fryers are available in various sizes, with an array of features and options for a range of commercial fryer applications. The overall tank widths on the 35 and 45 models are the same. The 45 models have a larger tank capacity than the 35 models. The 65 models have a larger tank capacity than the 45 models . The 65 and 85 models are the same width. The 85 models have a larger tank capacity than the 65 models.

The GRD models have digital controls and a solid state thermostat. The GRC Fryers have a microprocessor (computer) control and timer.

SPECIFICATIONS

 

No.

 

 

 

Model

Tubes

BTU/Hr.

Width

Lbs. of Fry Compound

GRD25

2

60,000

10 1/2"" (27 cm)

25-30 (11-14 kg)

 

 

 

 

 

GRD35, GRC35

3

90,000

15 1/2"" (39 cm)

35-40 (16-18 kg)

 

 

 

 

 

GRD45, GRC45

4

120,000

15 1/2"" (39 cm)

45-50 (20-23 kg)

 

 

 

 

 

GRD65, GRC65

5

150,000

21"" (53 cm)

65-75 (29-34 kg)

 

 

 

 

 

GRD85, GRC85

5

150,000

21"" (53 cm)

70-85 (32-39 kg)

 

 

 

 

 

– 5 –

Image 5 Contents
Installation GRD and GRC Series GAS Fryers For Your Safety Important for Your SafetyTable of Contents Table of Contents General SpecificationsBattery Configurations Options and FeaturesNon Filter Models C DFilter Fryer Fryer Fryer Dump Filter Fryer Dump Fryer Fryer Fryer Fryer Dump FryerRO Series Frymate Features FIELD-INSTALLED Accessories FACTORY-INSTALLED OptionsGR Series Frymate Dump Station Heat Lamp TopsUnpacking InstallationLocation Installation Codes and StandardsUnited States of America CanadaFryers Mounted on Casters AssemblyFryers Mounted on Legs Non-Batteried Fryers GAS Pressures and Orifices Testing the GAS Supply Piping SystemGAS Connections Electrical Connections Leveling FryerFlue Connections Before First USE OperationSeasoning Filling FRY Tank with ShorteningLighting Instructions for Manual Pilot Ignition Fig Startup with Electronic Igniter Control Guide GRD SeriesControls Programming Guide ProgrammingMelt Options GRD Series Extended Shutdown Models With Basket Lift OptionShutdown GRC Series Parameter Steps Left Display Right Display Set Back Dispose Melt Options GRC SeriesHeating Melt L Melt S Time Temperature and Time ProgrammingTemperature Advanced Time Features Setting Advanced Time Features Time Programming Quick Chart Shutdown Recommended Basket Capacities Frying Guidelines All ModelsFry Basket Guidelines Filter-Ready Fryers For Use With Mobile Filter Only Daily FilteringFiltering Guidelines All Models Filtering Procedures Non-Filter-Ready Fryers Battery Interplumbing Only Available on KleenScreen ModelsHigh Limit Device All Models Drain Interlock GRD and GRC SeriesWeekly or AS Required CleaningDaily Service MaintenanceLubrication VentSymptom Possible Causes Troubleshooting GuidePilot OUT Alarms and Error Messages GRD and GRC Series