Vulcan-Hart GRD85 ML-052306, GRC85 ML-052307, GRD35 ML-052080

Vulcan-Hart GRD85 ML-052306, GRC85 ML-052307 Parameter Steps Left Display Right Display

Page 22

Temperature, time and other parameters must be set before operating. Follow the Program Guide to configure the fryer to your particular operation.

Press to enter into the program mode, then follow the steps under each parameter to enter the

desired information. To exit the parameter and save changes, press . To exit the program

completely, press again.

NOTE: To use set back parameter, the computer must be programmed for basket lifts.

PARAMETER		STEPS	LEFT DISPLAY	RIGHT DISPLAY
	Press		SELECT	OPTIONS
Fahrenheit or	Press		DEGREES F or C	F or C
Fahrenheit or
Celsius	Press	to select Fahrenheit or Celsius.	DEGREES F or C	F or C
	Press	to select Fahrenheit or Celsius.	DEGREES F or C	F or C
	Press	when complete.	PROGRAM

	Press		SELECT	OPTIONS
No Password	Press		SET PASS	NEW PASS
Required	Press	to select NO PASS.	NO PASS	NEW PASS
	Press	to select NO PASS.	NO PASS	NEW PASS
	Press	when complete.	PROGRAM

	Press		SELECT	OPTIONS
	Press		SET PASS	NEW PASS
Password	Press	to select PASS REQ.	PASS REQ	NEW PASS
Required	Press	to select PASS REQ.	PASS REQ	NEW PASS
Required
	Press	and enter numeric code.	CODE XXXX	NEW PASS
	Press	when complete.	PROGRAM

	Press		SELECT OPTIONS	OPTIONS
Beeper	Press		VOLUME #	BEEPER
Beeper
Volume	Press	to select volume.	1, 2 or 3	BEEPER
	Press	to select volume.	1, 2 or 3	BEEPER
	Press	when complete.	PROGRAM


		– 22 –

Image 22

Contents

Vulcan-Hart GRD85 ML-052306, GRC85 ML-052307 Parameter Steps Left Display Right Display