Scotsman Ice SCCG50, SCCP50 service manual Specifications

Page 2

SCCG50 & SCCP50

Service Manual

Specifications

This ice machine is designed to be used indoors, in a controlled environment. It can be used in a wide variety of environmental conditions, but there are limits. Use outside of the listed limitations is misuse and will void the warranty.

Air temperature limits:

The ice machine will operate adequately within the limits, but functions best in temperatures between 70 and 80 degrees F.

Minimum – 50 degrees F. (10oC)

Maximum – 100 degrees F. (38oC)

Water temperature limits:

Minimum – 40 degrees F. (4.5oC)

Maximum – 100 degrees F. (38oC)

Water pressure limits:

Minimum – 20 psi (1.4 bar)

Maximum – 80 psi (5.5 bar)

Options:

Door Panel kits: Finished door panels are available from Scotsman for attachment to the machine, or a custom panel can be made.

Kit Number

Panel Finish

Handle Finish

KDFW

White

White

KDFWS

White

Stainless Steel

KDFB

Black

Black

KDFBS

Black

Stainless Steel

KDFS

Stainless Steel

Stainless Steel

Kickplate Extension: In some situations the leg levelers will be extended enough to become visible. A kit to extend the kickplate over the legs is KKPF.

Cabinet Stability: In some free standing installations it may be prudent to add a bracket that secures the back of the cabinet to a wall. That kit number is KATB.

Drain Conversion:

Because the ice machine is making a food product, the water supply to the ice machine must be potable, or fit for human consumption.

Electrical

115 volt, 60 Hz. Plug into dedicated 15 amp circuit.

Power consumption: 275 - 400 Watts. Varies during Freeze and Harvest cycles.

Voltage limits:

Minimum - 104 volts

Maximum – 126 volts

A gravity drain model can be converted to a drain pump model by installing a drain pump kit. The drain pump kit consists of a drain pump, wiring harness and associated tubing. The kit number is A39462-021.

Warranty Information

Warranty information is supplied separately from this manual. Refer to it for coverage. In general, the warranty covers defects in materials or workmanship and does not cover corrections of installation errors or maintenance.

Models: There are six models, all air cooled:

SCCP50M-1WU – Pump model, white cabinet

SCCG50M-1WU – Gravity drain model, white cabinet

SCCP50M-1BU – Pump model, black cabinet

SCCG50M-1BU – Gravity drain model, black cabinet

SCCP50M-1SU – Pump model, stainless cabinet

SCCG50M-1SU – Gravity drain model, stainless cabinet

July 2008

Page 2

Image 2
Contents Table of Contents IntroductionSpecifications LEG Adjustment Places Drain Flexible Tubing Cabinet LayoutAir flow Scale can shorten machine life Installation OverviewWater Quality Filters and TreatmentDoor Covering Door Panel Custom PanelDoor Panel Attachment Custom Panel Installation Notes Door swing changeInstallation Water & Drain Drain Pump Model drain installationGravity Drain Initial Start Up Installation check listElectrical Cube Size Adjustment Cube Size Change TableHarvest Time Adjustment Harvest Time TableReset time to clean indicator light Control SettingsAutomatic water purge enable / disable Use How to clean the condenser and winterize Condenser cleaningHow to remove scale from the ice making system System Information Water System Components Controller Maximum Harvest Time minutesPerformance Information Discharge Pressure Refrigeration SystemTime Thermistor Values Deg. F · Ohms Deg. F. · OhmsService Diagnosis Problem Likely Cause Probable SolutionMakes excessive noise Removal and Repair Control Panel Evaporator ThermistorController TransformerRemoval and Repair Cabinet Removal Page Refrigeration Service