Scotsman Ice SCCP30, SCCG30 service manual How to remove scale from the ice making system

Page 17

SCCG30 & SCCP30

Service Manual

How to remove scale from the ice making system.

1.Scoop out all of the ice, either discard it or save it in an ice chest or cooler.

2.Switch the machine Off.

3.Pour 8 ounces of Scotsman Ice Machine Scale Remover (available from a local Scotsman Distributor or Dealer) into the ice machine reservoir.

4.Switch the machine On.

5.Operate the machine for about

2hours.

6.Pour a gallon of hot (95oF. –

115oF.) water into the bin to melt ice formed during the cleaning process and to flush out the drain.

7.Clean the bin liner of mineral scale by mixing some ice machine scale remover and hot water, and using that solution to scrub the scale off of the liner.

8.Rinse the liner with hot water.

9.Sanitize the bin interior.

10.Replace the ice removed in step 1.

The ice scoop should be washed regularly, wash it just like any other food container.

Pour Scale Remover Here

September 2009

Page 17

Image 17
Contents Introduction Table of ContentsSpecifications Cabinet Layout LEG Adjustment Places Drain Flexible TubingAir flow Filters and Treatment Installation OverviewWater Quality Door Panel Custom Panel Door CoveringDoor Panel Attachment Custom Panel Door swing change Installation NotesDrain Pump Model drain installation Installation Water & DrainGravity Drain Initial Start Up Installation check listElectrical & Start Up Side Views of Cubes Cube Size AdjustmentHarvest Time Adjustment Use Condenser cleaning How to clean the condenser and winterizeHow to remove scale from the ice making system Electrical Components System InformationOverall Water System Components Performance Information Refrigeration System Problem Likely Cause Probable Solution Service DiagnosisMakes excessive noise Removal and Repair Cube Size Thermostat Harvest TimerRemoval and Repair Cabinet Removal SCCG30 & SCCP30 Refrigeration Service