Maytag W10175486A installation instructions Temperature and Moisture, Ice and Water

Page 17

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely.”

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsWater Supply Requirements Recommended Grounding MethodConnect the Water Supply Style 2-French Doors Complete the InstallationRefrigerator Doors and Drawer Reverse Door Standard Door optional Remove Door and Hinges Style 1-Standard DoorRemove and Replace Freezer Drawer Replace Door and Hinges Style 1-Standard DoorRemove and Replace Drawer Handle Remove Drawer FrontStyle 1-Standard Door Door Removal Replacement Door Swing Reversal optionalDrawer Front Removal Drawer Front Replacement Style 2-Four Adjustable Rollers Adjust the DoorStyle1-Two Adjustable Rollers Style 3-Leveling screwRefrigerator USE Using the ControlsOpening and Closing Doors Electronic and Dial ControlsDigital Controls Ice Maker Crisper Humidity ControlRefrigerator Care CleaningWater Dispenser Water Filtration SystemChanging the Light Bulb To Clean Your RefrigeratorRefrigerator Operation TroubleshootingIce and Water Temperature and MoistureWater dispenser will not operate properly Water Filter CertificationsWater is leaking from the dispenser system Water from the dispenser is warmApplication Guidelines/Water Supply Parameters Product Data SheetsLimited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSeguridad DEL Refrigerador Instrucciones Para EL Usuario DEL RefrigeradorRequisitos de ubicación Instrucciones DE InstalaciónDesempaque el refrigerador Requisitos del suministro de agua Requisitos eléctricosMétodo de conexión a tierra recomendado Presión del aguaConexión a la línea de agua Conecte el suministro de aguaConexión al refrigerador EstiloEstilo 2-Dos puertas Puertas y cajón del refrigeradorComplete la instalación Modelos de congelador con puerta Manijas de plásticoModelos con congelador de cajón Puerta del congelador CarcasaPuerta del refrigerador Cómo quitar y volver a colocar la manija del cajón Cómo quitar y volver a colocar el cajón del congeladorPara quitar el frente del cajón Para volver a colocar el frente del cajónEstilo 1 Puerta estándar Bisagra superiorEstilo 2-Dos puertas Cómo quitar y volver a poner la puerta en su lugarEstilo 2-Cuatro rodillos ajustables Cómo ajustar la puertaEstilo 1-Dos rodillos ajustables Uso de los controles Cómo abrir y cerrar las puertasControles electrónicos y con cuadrante Estilo 3-Tornillo niveladorControl digital Temp Alarm Alarma de temperatura Reset Filter Reposición del filtroDoor Alarm Alarma de la puerta Alarma ALSistema de filtración de agua Fábrica de hieloDespachador de agua Cómo cambiar el foco Cuidado DE SU RefrigeradorLimpieza Funcionamiento del refrigerador Solución DE ProblemasEl refrigerador no funciona Parece que el motor funciona excesivamenteHielo y agua Temperatura y humedadEl hielo tiene mal sabor, mal olor o un color grisáceo Los cubos de hielo son huecos o pequeñosEl despachador de agua no funciona debidamente El agua gotea del sistema del despachadorPautas de aplicación/Parámetros para el suministro de agua Hoja DE Datos DEL ProductoGarantía Limitada MaytagExclusiones DE LA Garantía Esta garantía limitada no cubreSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Spécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Style 2-Porte à deux battants Achever l’installationPortes et tiroir du réfrigérateur Modèles avec tiroir de congélation Dépose des portes et des charnières Style 1-Porte standardModèles de compartiments de congélation avec porte CaisseRetirer et réinstaller le tiroir du congélateur Réinstallation Porte et charnières Style 1-Porte standardDépose et réinstallation de la poignée du tiroir Style 2-Portes à deux battantsÉtapes finales Réinstallation de la façade du tiroirDépose de la façade du tiroir Style 1-Porte standard Inversion du sens douverture de la porte facultatifStyle 2-Portes à deux battants Charnières supérieuresStyle 2-Quatre roulettes ajustables Ajustement de la porteStyle 1-Deux roulettes ajustables Commandes électroniques et à cadran Utilisation des commandesUtilisation DU Réfrigérateur Style 3-Vis de réglage de laplombCommandes numériques Door Alarm avertisseur de la porte Temp Alarm alarme de dépassement de températureReset Filter réinitialisation du filtre Préférences de lutilisateur avec la commande numériqueDistributeur d’eau Machine à glaçonsNettoyage Entretien DU RéfrigérateurSystème de filtration de leau Remplacement de l’ampoule d’éclairage Fonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéLa température est trop élevée Il y a une accumulation dhumidité à lintérieurLeau du distributeur est tiède Le distributeur deau ne fonctionne pas correctementSystème de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitLa présente garantie limitée ne couvre pas Garantie LimitéeArticles Exclus DE LA Garantie EN/FR PN W10175446A W10175486A

W10175486A specifications

The Maytag W10175486A is a high-quality replacement part designed specifically for Maytag appliances, particularly focused on enhancing the performance of dishwashers. This part, often referred to as a dishwasher door latch, plays a crucial role in ensuring that the dishwasher door securely closes during operation, thus preventing leaks and ensuring that the cleaning process is efficient.

One of the main features of the Maytag W10175486A is its robust construction. Made from durable materials, it is designed to withstand the rigors of regular use without succumbing to wear and tear. This durability translates into longevity, making it a worthwhile investment for homeowners looking to maintain the functionality of their dishwashers.

The W10175486A incorporates a user-friendly installation design. This ease of installation means that homeowners can replace their dishwasher door latch without needing to hire a professional, which can save both time and money. With just a few simple steps, users can ensure their dishwasher operates safely and efficiently once again.

In terms of technology, the Maytag W10175486A is designed to meet rigorous safety and performance standards. It is engineered to work with a variety of Maytag dishwasher models, ensuring compatibility and seamless integration into existing systems. This versatility is a significant advantage, as it means that many Maytag users can benefit from this quality part without worrying about compatibility issues.

Another important characteristic of the W10175486A is its role in enhancing the overall efficiency of the dishwasher. A properly functioning door latch ensures that the door remains sealed during wash cycles, which is vital for effective cleaning. This sealing prevents water leaks, thus improving the machine's energy efficiency and reducing water wastage.

Additionally, the Maytag W10175486A is backed by Maytag's reputation for quality and reliability. As a brand known for its robust and dependable appliances, Maytag ensures that every part meets high standards, providing consumers with peace of mind. In summary, the Maytag W10175486A is an essential part that combines durability, ease of installation, and superb compatibility, making it a smart choice for anyone looking to repair or maintain their Maytag dishwasher.
Top Page Image Contents