Installation Instructions
WALL-MOUNTED INSTALLATION—VENTED TO THE OUTSIDE
4PREPARE THE HOOD
•Remove the hood from the box. Remove packaging and tape.
Electrical | Remove 2 side |
cover screws | |
panel |
|
•Remove one screw on each side of the cover on the electrical panel. Lift off the cover and set aside with screws.
Junction box |
Inside screw |
Secure |
electrical panel |
with 3 screws |
•Stand the electrical panel upright.
•Align the screw holes in the bottom of the panel with the holes on the base of the hood at the front side.
•Install 3 screws provided.
• Snap the damper into the | Install |
exhaust outlet on the top | damper |
of the hood. |
|
|
5 MOUNT THE HOOD
Install a wood screw | Mounting |
on each side of the | bracket |
mounting frame |
|
•Lift the hood onto the mounting bracket.
•Check to be sure it is level.
•Install wood screws through the hood and into the wall on each side of the mounting bracket.
Install bottom
mounting
screws
•Extend the canopy forward for better access to the rear mounting screw holes.
•Install 2 wood screws or fasteners through the bottom of the hood into the wall.
11