Using an Existing Nema 14-50R Receptacle

GE 49-85167-1, C2S980 Using an Existing Nema 14-50R Receptacle, Replace the Power Cord Optional

Safety Instructions

Installationof the range.

Connect the Range to the Electrical Supply

Skip to Step 5 if the power cord shipped on the range does not match your wall receptacle.

Using an Existing NEMA 14-50R Receptacle

Operating Instructions

■Plug therangepower cord intoa properly grounded wall receptacle. Skip to Step 6 if the range powercordmatchesthewall receptacle.

NOTE: Your range is shipped with a 4-prong plug to be used in a NEMA 14-50R receptacle. Should you choose to change your plug, use only a 3- wire power cord, 3-wire conduit or 4-wire conduit. Follow the appropriate instructions below,in Step 5, for your application.

Effective January 1, 1996, theNationalElectricCode requires that newconstruction (notexisting)utilizea 4-conductor connectionto an electricrange.

A range cordrated at 40 amps with 125/250 minimum volt range is required. A 50-amp range cord is not recommended but if used, it should be marked for use with nominal 13⁄8 diameter connection openings. Care should be taken

to center the cable and strain relief within the knockout hole to keep the edge fromdamaging the cable.

NOTE: A 4-conductor cord is to be used when the appliance is installed in a mobile home or when local codes do not permit grounding through the neutral.

Replace the Power Cord (Optional)

Perform this step only if the power cord shipped on the rangedoes not matchyourwall receptacle.

Remove the wire cover (on the back	Loosen the strain relief screws and remove
of the range) by removing two (2) screws	the power cord.
using a 1/4” nut driver.

Do not discard these screws.

Consumer Support Troubleshooting Tips

2 screws to remove wire cover

Retaining tab

Back of range

Wire cover

Remove the 3 lower power cord terminal screws from the terminal block and the ground screw and plate.

	Terminal	Neutral
	block
		terminal

Ground plate

(groundingto

range)

Ground screw

NOTE: The replacement power cord must be a 3-conductor or a 4-conductor UL-listed range cord or conduit. Cords may be provided with ring terminals on wire and a strain relief device.

Follow the 3-wire power cord (option 5A),

3-wire conduit (option 5B) or 4-wire conduit (option 5C) sections as appropriate for your application.

46		Place the terminal screws and ground
		screw in safe location for lateruse.

183D5580P249, 49-85167-1, 04-09 JR, C2S980 specifications

The GE C2S980,04-09 JR,49-85167-1,183D5580P249 is a sophisticated control system utilized in various industrial applications, specifically designed for enhancing efficiency and reliability. This model exemplifies advanced technologies and systems integration, catering to the needs of modern industries.

One of the main features of the GE C2S980 is its flexibility, allowing it to be integrated seamlessly into different types of systems. This adaptability makes it suitable for manufacturing plants, power generation facilities, and other industrial environments. The device is engineered for mobility and can be quickly deployed or modified according to the operational requirements of the facility.

A notable technology embedded within the GE C2S980 is its robust data acquisition capabilities. It can gather and process large volumes of data in real-time, which is crucial for effective monitoring and control. This feature enables operators to make informed decisions based on accurate and up-to-date information regarding equipment performance and system health.

Additionally, the GE C2S980 is equipped with advanced diagnostic tools. These tools assist in identifying faults and inefficiencies within the system, thereby reducing maintenance costs and minimizing downtime. Its built-in analytics engine helps in predictive maintenance, enabling industries to foresee potential issues before they escalate into serious problems.

The C2S980 also prioritizes user experience, featuring an intuitive interface that simplifies the navigation of complex controls. This user-friendly design reduces the learning curve for operators, enhancing overall productivity.

Another critical characteristic is its compliance with industry standards, ensuring safety and reliability in various applications. The system is designed to operate in challenging conditions and is built to withstand environmental factors, thus guaranteeing longevity and consistent performance.

In terms of connectivity, the GE C2S980 supports various protocols, facilitating interoperability with other devices and systems. This connectivity is essential for industries that rely on integrating multiple technologies into their operations.

Overall, the GE C2S980,04-09 JR,49-85167-1,183D5580P249 stands out due to its combination of advanced technology, user-centric design, and adaptability to diverse industrial environments, making it an invaluable asset for enhancing operational efficiencies.