Safety Instructions Operating, Quality of Flames

GE 183D5580P249 Safety Instructions Operating, Check Ignition of Surface Burners, Level the Range

Read these instructions completely and carefully.

Check Ignition of Surface Burners

Operation of all cooktop burners should be checked after the range and gas supply lines have been carefully checked for leaks.

Electric Ignition

Select a top burner knob and simultaneously push in and turn to LITE position. You will hear

a clicking sound indicating proper operation of the spark module. Once the air has been purged from the supply lines, burners should light within

4 seconds. After burner lights, rotate knob out

of the LITE position. Try each burner in succession until all burners have been checked.

Safety Instructions Operating

Quality of Flames

The combustion quality of burner flames needs to be determined visually.

(A) Yellowflames—

Call for service

(B) Yellow tipson outer cones— Normal for LP gas

If burner flames look like (A), call for service.Normal burner flames should look like (B) or (C), depending on the type of gas you use.

With LP gas, some yellow tippingon outer cones is normal.

Instructions

Instructions	Installation

Troubleshooting

Level the Range

Install the oven racks in the ovenand position the range where it will be installed.

Lower	Raise	Lower
	range	Lower
	range	range
range		range
range
Leg
leveler
Raise
range
(on some models)		(on some models)

Check for levelness by placinga spiritlevel or a cup, partiallyfilled with water,on one of the oven racks. If using a spiritlevel, take two readings—with the level placed diagonally first in one direction and then the other.

Remove the lower oven drawer.See the Care and cleaning of the range section. The front leveling legs can be adjusted from the bottom and the rear legs can be adjusted from the top or the bottom.

Use an open-end or adjustable wrench to adjust the leveling legs until the range is level.

WARNING: Never completely remove the leveling leg as the range will not be secured to the anti-tip device properly.

After the range is level, slide the range away fromthe wall so that the Anti-Tip device can be installed.

Tips Consumer Support

183D5580P249, 49-85167-1, 04-09 JR, C2S980 specifications

The GE C2S980,04-09 JR,49-85167-1,183D5580P249 is a sophisticated control system utilized in various industrial applications, specifically designed for enhancing efficiency and reliability. This model exemplifies advanced technologies and systems integration, catering to the needs of modern industries.

One of the main features of the GE C2S980 is its flexibility, allowing it to be integrated seamlessly into different types of systems. This adaptability makes it suitable for manufacturing plants, power generation facilities, and other industrial environments. The device is engineered for mobility and can be quickly deployed or modified according to the operational requirements of the facility.

A notable technology embedded within the GE C2S980 is its robust data acquisition capabilities. It can gather and process large volumes of data in real-time, which is crucial for effective monitoring and control. This feature enables operators to make informed decisions based on accurate and up-to-date information regarding equipment performance and system health.

Additionally, the GE C2S980 is equipped with advanced diagnostic tools. These tools assist in identifying faults and inefficiencies within the system, thereby reducing maintenance costs and minimizing downtime. Its built-in analytics engine helps in predictive maintenance, enabling industries to foresee potential issues before they escalate into serious problems.

The C2S980 also prioritizes user experience, featuring an intuitive interface that simplifies the navigation of complex controls. This user-friendly design reduces the learning curve for operators, enhancing overall productivity.

Another critical characteristic is its compliance with industry standards, ensuring safety and reliability in various applications. The system is designed to operate in challenging conditions and is built to withstand environmental factors, thus guaranteeing longevity and consistent performance.

In terms of connectivity, the GE C2S980 supports various protocols, facilitating interoperability with other devices and systems. This connectivity is essential for industries that rely on integrating multiple technologies into their operations.

Overall, the GE C2S980,04-09 JR,49-85167-1,183D5580P249 stands out due to its combination of advanced technology, user-centric design, and adaptability to diverse industrial environments, making it an invaluable asset for enhancing operational efficiencies.