USING THE REFRIGERATOR/BEER DISPENSER
DRAW A GLASS OF BEER
1.Start with a clean beer glass that has been wetted in cold water. Place the glass at a 45º angle, one inch below the faucet. Do not let the glass touch the faucet. Open the faucet all the way.
2.After the glass has reached half full, gradually bring the glass to an upright position.
3.Let the remaining beer run straight down the middle.
This insures proper
release of CO2 by producing a 3/4” to 1” foam head.
4.Close the faucet completely and quickly.
16