Safety Instructions

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

READ AND SAVE THESE INSTRUCTIONS

WARNING

To reduced the risk of ﬁre, electric shock, or injury to persons, observe the following:

A.Installation work and electrical wiring must be done by qualiﬁed person(s) in accordance with all applicable codes and standards, including ﬁre-related construction.

B.Sufficient air is needed for proper combustion and exhausting of gases through the ﬂue (chimney) of fuel burning equipment to prevent back- drafting. Follow the heating equip- ment manufacturer’s guideline and safety standards such as those published by the National Fired Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

C.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

D.Ducted fans must always be vented to the outdoors.

E.Always unplug or disconnect the appliance from the power supply before servicing.

F.This unit is designed for indoor use only. Use this unit only in the manner intended by the manufacturer.

This unit is manufactured for indoor use only. Do not use this unit outdoors.

WARNING

For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

To reduce risk of ﬁre and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls, ceilings, attics, crawl spaces or garages.

To reduced the risk of ﬁre, use only metal duct work.

To reduce the risk of ﬁre, electric shock and injury to persons, ventilator assemblies. All models must be installed with integral blower, Model VTN600CV2C or remote blowers models VTI610D or VTR630D. Other ventilator blowers cannot be substituted.

To reduce the risk of ﬁre or electric shock, do not use the fan with any solid- state speed control device.

This appliance has been found to be in compliance with UL 507 Standard for Electric Fans and CAN/CSA-22.2 No. 113 Canadian Standard for Fans and Ventilators. It is the responsibility of the owner and the installer to determine if additional requirements or standard apply in speciﬁc installation.

UCVM30FS, UCVM36FS specifications

The Thermador UCVM36FS is a premium undercounter wine refrigerator designed for wine enthusiasts who demand the finest in preservation technology and aesthetics. With a sleek and modern design, this wine storage unit perfectly blends into any kitchen or entertainment area, providing both functionality and style.

One of the standout features of the UCVM36FS is its capacity to hold up to 36 standard wine bottles. This makes it an ideal choice for wine collectors and social hosts alike, allowing users to store a diverse collection of their favorite vintages. The adjustable shelves are crafted from natural wood, which not only adds a touch of elegance but also helps to cradle bottles and reduce vibration, a key aspect of wine preservation.

Temperature control is critical in wine storage, and the UCVM36FS excels in this area. It offers precise temperature settings, ranging from 4°C to 18°C (39°F to 65°F), ensuring that each type of wine can be stored at its ideal temperature. The dual-zone temperature management technology allows for separate settings for red and white wines, ensuring optimal conditions for both.

Another innovative technology featured in the Thermador UCVM36FS is its advanced cooling system. The unit utilizes a compressor-based cooling system with dynamic cooling technology, which helps maintain a consistent temperature throughout the refrigerator. Additionally, an efficient filtration system protects the wine from external odors and flavors, thus preserving its original taste and quality.

The UCVM36FS also incorporates a no-vibration design. Vibration can disturb sediments in wine, affecting flavor and quality; therefore, Thermador has engineered this model to operate with minimal vibrations. Furthermore, the energy-efficient LED lighting illuminates the interior without generating excess heat, allowing for easy viewing and selection of wines while remaining energy conscious.

A key characteristic of the Thermador UCVM36FS is its customizable design. The unit features a stainless-steel door with a glass panel, offering an elegant display of your wine collection while ensuring UV protection, which shields wines from harmful light exposure. The integrated design allows for a flush installation that enhances the kitchen decor.

In conclusion, the Thermador UCVM36FS undercounter wine refrigerator is equipped with advanced wine preservation technologies, ample capacity, customizable design, and meticulous temperature control, making it a standout choice for discerning wine lovers. Whether for personal enjoyment or entertaining guests, this unit promises to elevate your wine storage experience to new heights.