Install Ductwork Remote Blower, If Used

Step 4: Install Ductwork (Remote Blower, If Used)

A.Install the ductwork and remote blower (if used) in accordance with the ductwork routing plan developed in Step 1.

B.Make sure that the installation complies with all installations guidelines. Also check that the opening where duct passes through outside wall or roof has been properly ﬂashed and sealed to prevent leakage.

C.If using Integral Blower, Model VTN600CV2C, proceed to Step 5.

D.If using Remote Blower Model VTI610D or VTR630D, refer to Installation Instructions with that model.

Step 5: Install Electrical Service

Check your local building codes for proper method of installation. In the U.S., if there are no applicable local codes, this unit should be installed in accordance with the National Electric Code ANSI/NFPA No. 70, Current Issue. (In Canada, installation must be in accordance with the CAN 1-B149.1 and .2-Installation Codes for Gas Burning Appliances and/or lodal codes).

The appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING – Improper grounding can result in a risk of electric shock.

Consult a qualiﬁed electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualiﬁed electrician install an outlet near the appliance.

The receptacle should be located under the countertop so that the 30 inch long power cord from the vent will reach it.

See Figure 9. The cord should be routed beneath the appliance and away from heat generated by the cooktop. Access should not be obstructed by blower, cabinet work, ductwork or electrical/gas utilities for the cooktop. All power for the vent system (including the remote blower, if used) is supplied via the cord to the intake unit. The outlet can usually be extended from another kitchen outlet or have its own circuit from the main service panel.

Do not plug vent cord into receptacle until Step 8.

Step 6: Mount Vent and Cooktop

A.Remove grease ﬁlters and any packing materials from inside the intake.

B.Set the vent intake into rear of countertop opening. Carefully lower it into position so that the ﬂanges on the rear sides and edges fully support the unit hanging from the coluntertop.

C.Hold the unit against the rear of the countertop opening, and slide the leg brackets down to meet the bottom of cabinet. Check and adjust for plumb, then fasten leg brackets to cabinet with hardware provided.

D.Place the cooktop in countertop opening with the rear edge of cooktop overlapping the front edge of the vent. Make sure rear edge of cooktop does not bind against front of snorkel. Follow the manufacturer’s installation instructions for installing gasket strips, protective heat tape (if required), securing the cooktop to the countertop and making the cooktop electrical and/or gas connections.

UCVM30FS, UCVM36FS specifications

The Thermador UCVM36FS is a premium undercounter wine refrigerator designed for wine enthusiasts who demand the finest in preservation technology and aesthetics. With a sleek and modern design, this wine storage unit perfectly blends into any kitchen or entertainment area, providing both functionality and style.

One of the standout features of the UCVM36FS is its capacity to hold up to 36 standard wine bottles. This makes it an ideal choice for wine collectors and social hosts alike, allowing users to store a diverse collection of their favorite vintages. The adjustable shelves are crafted from natural wood, which not only adds a touch of elegance but also helps to cradle bottles and reduce vibration, a key aspect of wine preservation.

Temperature control is critical in wine storage, and the UCVM36FS excels in this area. It offers precise temperature settings, ranging from 4°C to 18°C (39°F to 65°F), ensuring that each type of wine can be stored at its ideal temperature. The dual-zone temperature management technology allows for separate settings for red and white wines, ensuring optimal conditions for both.

Another innovative technology featured in the Thermador UCVM36FS is its advanced cooling system. The unit utilizes a compressor-based cooling system with dynamic cooling technology, which helps maintain a consistent temperature throughout the refrigerator. Additionally, an efficient filtration system protects the wine from external odors and flavors, thus preserving its original taste and quality.

The UCVM36FS also incorporates a no-vibration design. Vibration can disturb sediments in wine, affecting flavor and quality; therefore, Thermador has engineered this model to operate with minimal vibrations. Furthermore, the energy-efficient LED lighting illuminates the interior without generating excess heat, allowing for easy viewing and selection of wines while remaining energy conscious.

A key characteristic of the Thermador UCVM36FS is its customizable design. The unit features a stainless-steel door with a glass panel, offering an elegant display of your wine collection while ensuring UV protection, which shields wines from harmful light exposure. The integrated design allows for a flush installation that enhances the kitchen decor.

In conclusion, the Thermador UCVM36FS undercounter wine refrigerator is equipped with advanced wine preservation technologies, ample capacity, customizable design, and meticulous temperature control, making it a standout choice for discerning wine lovers. Whether for personal enjoyment or entertaining guests, this unit promises to elevate your wine storage experience to new heights.