Thermador UCVM36FS, UCVM30FS manual Parts Needed Parts Supplied

Parts Needed	Parts Supplied
❑ Blower (Remote or Integral)	❑ Downdraft assembly (1)
❑ Tape Measure	❑ #8 Sheetmetal Screws (8)
❑ Phillips Head Screwdriver	❑ Blower Cord Strain Relief (1)
❑ Duct Tape	❑ Hardware for brackets on vent (2)
❑ Ductwork (configuration varies	❑ Remote Blower Pigtail
depending on location; See pages 7-12
for further information)

❑Additional Sheetmetal screws

(as necessary for ductwork installation)

❑Transition(s) (style varies depending on ductwork)

Transition box for remote blower installations is available as an accessory.

❑Saw (or equivalent for cutting countertop)

❑#8 x 1 1/4” Wood Screws (4)

4