Thermador PG48, PG36 Installing Anti-Tip Device, Tools Needed for Installation of Anti-Tip Device

Page 13

Step 4: Installing Anti-Tip Device

For all 30" and 36" ranges, an anti-tip device must be installed as per these instructions.

WARNING RANGE TIPPING HAZARD

All ranges can tip and injury can result. To prevent accidental tipping of the range, attach it to the floor, wall or cabinet by installing the Anti-Tip Device supplied.

A risk of tip-over may exist if the appli- ance is not installed in accordance with these instructions.

If the range is pulled away from the wall for cleaning, service or any other reason, ensure that the Anti-Tip Device is prop- erly reengaged when the range is pushed back against the wall. In the event of abnormal usage (such as a person stand- ing, sitting, or leaning on an open door), failure to take this precaution can result in tipping of the range. Personal injury might result from spilled hot liquids or from the range itself.

WARNING

ALL RANGES CAN TIP

INJURY TO PER- SONS COULD RE- SULT

INSTALL ANTI-TIP DEVICES PACKED WITH RANGE

SEE INSTALLATION INSTRUCTIONS

WARNING

ELECTRICAL SHOCK HAZARD

Use extreme caution when drilling holes into the wall or floor. There may be con- cealed electrical wires located behind the wall or under the floor.

Identify the electrical circuits that could be affected by the installation of the Anti- Tip Device, then turn off power to these circuits.

Failure to follow these instructions may result in electrical shock or other per- sonal injury.

ATTENTION

PROPERTY DAMAGE

Contact a qualified installer or contrac- tor to determine the proper method for drilling holes through the wall or floor material (such as ceramic tile, hardwood, etc.)

Do not slide the range across an unpro- tected floor.

Failure to follow these instructions may result in damage to wall or floor cover- ings.

Tools Needed for Installation of Anti-Tip Device:

• Screwdriver, Phillips

• Hammer

• Drill, electric or hand

• Pencil or other marker

Measuring tape or ruler

1/8" drill bit (wood or metal wall or floor)

3/16" carbide-tipped masonry drill bit (concrete or concrete block wall or floor)

3/16" anchors, drywall or concrete, 4 each (not required if mounting bracket is being attached to solid wood or metal)

10

Image 13
Contents Installation Instructions Do Not install this range outdoors For Massachusetts InstallationsPlease Read Entire Instructions Before Proceeding What to do if YOU Smell GASContents Electric Power Supply Important Installation InformationGAS type verification Gas SupplyVentilation Requirements Hood PlacementSelect Hood and Blower Models Consider Make-Up AirCabinet Preparation Cabinet Clearances Side View Range must be connected GAS and Electric Supply ZonesOnly to the type of gas for which Wall Connection Electrical SupplyUnpacking, Moving and Placing the Range Chart a RangeGrill / Griddle Tilt Adjustment Not on all models Tools Needed for Installation of Anti-Tip Device Installing Anti-Tip DeviceProperty Damage Important Installation Information Installing Anti -Tip Device36 Ranges Figures 7A and 7B Mounting ANTI-TIP BracketHook UP Gas Requirements and HookupPhoto a Electrical Requirements, Connection & Grounding Chart B Electrical Supply Circuit RequirementsChart C Backguard Kit Model Numbers Backguard InstallationUSE Caution When Removing the DOOR. the Door is Very Heavy Door Removal and InstallationTest Rangetop Burners Burner Test and AdjustmentYellow Flames Yellow Tips on Outer ConesTest Oven Burners Flame Adjustment if necessaryTest Bake Burner Ignition Test Bake Burner FlameFinal Check List To Clean and Protect Exterior SurfacesGAS Supply ElectricalPage NE PAS installer cette gamme dehors Pour les installations au MassachusettsVeuillez lire toutes les instructions Avant de poursuivre AvertissementChapitre 6 Exigences pour lalimentation électrique Table des matièresMise EN Garde Informations importantes à propos de linstallationVérification DU Type DE GAZ Alimentation en gazChapitre 1 Exigences pour la ventilation Emplacement de la hotteApport d’air Chapitre 2 Préparation de l’emplacement Conversion des mesures Dégagement des armoiresVue latérale Gaz et zone électrique d’arrivée de toutes les cuisinières GAZ ET Zone ET Électrique DarrivéeCordon d’alimentation et prise Alimentation électriquePoids ’expédition 152 kg 335 lb Gril et grille réglage dinclinaison selon le modèle Avertissement Risque D’ÉLECTROCUTION Chapitre 4 Installation du dispositif antibasculeDommages causés à léquipement Cuisinières de 30 et 36 Figures 7A et 7B Informations Importantes À Propos DE L’INSTALLATIONExigences pour le gaz propane Exigences pour le gaz naturelRaccordement Modèle Tension Tableau C Références pour les plaques de protection Chapitre 7 Installation de la plaque de protectionLargeursmodèles Pour enlever la porte du four Chapitre 8 Enlever et installation de la porteVérification des brûleurs de surface de cuisson Chapitre 9 Tests et réglages de brûleursRéglage de flamme si nécessaire Vérifier les brûleurs du fourVérifier lallumage du brûleur surface de cuisson Vérifier lallumage du grilListe Finale DE Vérification Liste de vérification pour l’installateurAlimentation EN GAZ ÉlectricitéRemarques
Related manuals
Manual 88 pages 25.76 Kb

PG36, PG48, PRO-GRAND, PG30 specifications

The Thermador PG30 is a versatile and high-performance gas cooktop that combines luxury and functionality, making it a preferred choice for both professional chefs and home cooks. Designed with precision and quality, the PG30 stands out in the crowded kitchen appliance market.

One of the most appealing features of the Thermador PG30 is its powerful burners. The cooktop is equipped with four different burners, each designed to deliver consistent and robust heat. Among them, a star-rated burner can reach up to 18,000 BTUs, allowing for quick boiling and high-temperature cooking. This high-performance capability is perfect for searing meats or achieving the perfect stir-fry.

Another key technology integrated into the PG30 is the patented StarĀ® Burner design. This innovative feature promotes even heat distribution across the bottom of cookware, eliminating hotspots and ensuring that your dishes are cooked to perfection. Additionally, the burners are designed for easy flame adjustment, allowing for precise control over heat levels during cooking.

The PG30 also features a sleek stainless-steel surface, which not only enhances its aesthetic appeal but also makes it easier to clean. The surface is resistant to scratches and stains, maintaining its sophisticated appearance over time. Cooktop grates made from cast iron provide durability and support for heavy pots and pans while adding a professional touch to your kitchen.

Safety is paramount in the design of the Thermador PG30. The cooktop is equipped with a variety of safety features, including automatic re-ignition. This technology ensures that if a flame is accidentally extinguished, the burner will automatically reignite, preventing the buildup of gas. The cooktop also includes a child lock feature, which adds an extra layer of safety in homes with young children.

Lastly, the Thermador PG30 is compatible with various types of cookware, making it an excellent choice for culinary enthusiasts who prefer diverse cooking methods. Whether you use cast iron skillets, stainless-steel pots, or non-stick pans, the PG30 delivers exceptional performance with every use.

In summary, the Thermador PG30 gas cooktop combines advanced cooking technology, safety features, and stunning design to provide a top-tier cooking experience. It is an excellent addition to any modern kitchen, appealing to those who value quality, efficiency, and style in their culinary appliances.