About storage drawer removal, Safety Instructions

Normal

Coldest

Convertible Meat Drawer

The convertible meat drawer has its own cold air duct to allow a stream of cold air from the freezer compartment to flow around the drawer.

The variable temperature control regulates the air flow from the freezer compartment.

Set control lever down to the coldest setting to store fresh meats. If lever is left in meat

position for a long period of time, some frost may form on the inside of the drawer.

Set control lever up to convert the drawer to normal refrigerator temperature and provide extra vegetable storage space. Cold air duct is turned off. Variable settings between these extremes can be selected.

Safety Instructions

About storage drawer removal.

Not all features are on all models.

Operating

Drawer

Guides

When replacing the drawers, make sure you slide them through both drawer guides on the right side.

Drawer Removal

Drawers can easily be removed by tilting up slightly and pulling past stop location.

Remove the door bins from the fresh food door before removing the drawer.

To remove the shelf above the top drawer, first remove the top drawer and any food on the shelf. Then tilt the shelf up at the front and lift it up and out of the tracks.

To replace the shelf, raise the shelf front slightly and place the top hooks in the lowest large track slots. Then lower the front of the shelf until it is level.

To remove the drawers when the fresh food compartment door cannot be opened fully you need to roll the refrigerator forward until the door can be fully opened. In some cases this will require moving the refrigerator to the left as you roll it out.

Instructions Installation Instructions

About the additional features.

Not all features are on all models.

Divider Bins on the Fresh Food Compartment Door

Adjustable bins can easily be carried from refrigerator to work area.

To remove: Lift bin straight up until mounting hooks disengage.

To replace or relocate: Select desired shelf height, engage bin’s hook in slots on the tracks of the door, and push in. Bin will lock in place.

The divider helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the divider near the front and move it back and forth to fit your needs.

Troubleshooting Tips

Removable Wine Rack

Quick Space Shelf

Freezer Baskets

This shelf splits in half and slides under itself for storage of tall items on the shelf below.

Customer Service

22-27 specifications

The GE 22-27 is a versatile and efficient locomotive designed for a variety of rail transport applications. It showcases General Electric's commitment to innovation and performance in the rail industry. The 22-27 model is particularly known for its robust engineering and technological advancements that enhance its operational capabilities.

One of the main features of the GE 22-27 is its impressive power output, which is generated by a highly efficient diesel engine. This locomotive is equipped with a state-of-the-art 12-cylinder engine that delivers an output ranging typically from 2000 to 3000 horsepower. This significant power allows the locomotive to handle heavy freight loads while maintaining reliable speed and efficiency.

In terms of technology, the GE 22-27 incorporates advanced electronic controls that optimize engine performance and fuel consumption. The use of microprocessor-based control systems provides improved diagnostics and maintenance capabilities, enabling operators to monitor the health of the locomotive in real time. By utilizing these modern technologies, the GE 22-27 reduces downtime and increases overall productivity for rail operators.

Another characteristic of the GE 22-27 is its superior traction capabilities. The locomotive features a sophisticated traction control system that ensures optimal performance on various terrains and track conditions. This system allows for better acceleration and deceleration, making it suitable for both heavy freight and passenger transport.

The design of the GE 22-27 also emphasizes operator comfort and safety. The cab is ergonomically designed with user-friendly controls, allowing for easier navigation and operation for the crew. Additionally, the locomotive is equipped with modern safety features, including advanced braking systems and enhanced visibility aids, ensuring safe operation in diverse environments.

Moreover, the GE 22-27 is built with durability in mind. Its construction incorporates high-quality materials that withstand the rigors of heavy-duty usage, resulting in a long service life with minimal maintenance needs. This durability, combined with the locomotive's efficiency, ultimately translates into lower operational costs for railway companies.

In conclusion, the GE 22-27 locomotives stand out in the rail industry due to their powerful performance, advanced technology, traction capabilities, and focus on safety and operator comfort. These characteristics make them an excellent choice for rail operators looking for a reliable and efficient locomotive solution.