1.Refer to page 7 for disassembly instructions.
2.Open the cover housing with a fl
USING THE DOORS
Ensure that the doors close all the way and are securely sealed.
When the refrigerator door is only partially open, it will automatically close. But, the door will stay open when opened more than the auto close range and you must close it manually.
USING THE TILTING POCKET
The Tilting Pocket can be used to store up to a 16” pizza if you place it as shown in the illustration.
REMOVING THE FREEZER
ACCESSORIES
1. Tilting Pocket
To remove - Remove the tilting pocket ( 1 ) by pulling both support guards ( 2 ) aside. Take out both support guards by pulling them aside.
To replace - Hook the ends of the tilting pocket ( 1 ) onto the support guards ( 2 ) and push down until they lock into place.
1
2
straight out.
To relocate - Place the drawer onto the rails ( 4 ) by tilting it up. Lower the drawer into place until it is horizontal and slide the drawer ( 3 ) in.
4 |
3 |
3. Freezer Drawer
To remove the freezer drawer - Pull the freezer drawer out fully. Tilt up the rear of the bin and lift it out to remove.
To relocate the freezer drawer - Place the bin into the rail assembly.
Do not allow babies or children go inside
CAUTION the freezer drawer. They could damage the refrigerator and seriously injure themselves.
Do not sit on the freezer door. The door may break. Do not allow children to climb into the freezer drawer.
Do not remove the divider.
CAUTION
•If trapped inside, children may become injury WARNING and suffocate to death.
02 OPERATING
2. Super Extended Drawer
To remove - Pull the drawer out to full extension.
Tilt up the rear of the drawer and lift
operating _21
2013.3.4 1:33:32 PM |