Cleveland Range 22CET6.1, 22CET3.1 General Information, Laws, Codes, and Regulations

Page 7

CHAPTER 2 GENERAL INFORMATION

A.Laws, Codes, and Regulations

This equipment should be installed only by qualified, professional plumbers, pipe fitters, and electricians.

1.The installation of this appliance must conform with:

a.The National Electrical Code, ANSI/NFPA 70 (latest edition), or the Canadian Electrical Code, CSA C22.2, or local codes, as applicable.

•When installed, the appliance must be electrically grounded in accordance with the above.

•NOTE: This appliance is not GFI (GFCI) compatible.

b.The Food Code (latest edition) of the Food and Drug Administration (FDA).

2.This equipment is to be installed to comply with the applicable federal, state, or local plumbing codes.

3.Installation instructions must be read in their entirety before starting installation of this appliance.

4.Install this appliance according to the policies and procedures outlined in this manual.

5.Installation must comply with all local fire and health codes.

Improper installation, adjustment, alteration, service, or maintenance of this appliance, or installation of a damaged appliance can result in DEATH, INJURY, EQUIPMENT DAMAGE, and void the warranty. NEVER install damaged appliances, equipment, or accessories.

ALWAYS have installation and service performed by qualified Cleveland Range authorized personnel.

B. Inspect for Shipping Damage

•If the appliance is damaged or damage is suspected:

1.Submit a Damage Claim to the Shipper immediately.

2.Inform your dealer at once.

3.Inform Cleveland Range in writing within three (3) days.

2

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation Manual Keep this Manual for Reference Cleveland Statement of Policies Page Installation Manual Product Information Product InformationProduct Information Plate Laws, Codes, and Regulations General InformationInspect for Shipping Damage Product Views SteamChef 3.1 Dimensions and ClearancesSteamChef 6.1 Dimensions and Clearances Select a Location InstallationPage Install the KleanShield Install the LegsPacking Blocks Position and Level the 22CET KleanShield Install the Rear Vent Typical Drain Connection SteamChef 3 Shown Clearance MinimumInstall the Water Supply Lines Installation Requirements Water Supply Requirements and Installation10 Cleveland Range Single Water Supply Arrangement Filter Washer 110987 Shown Test Water Supply LinesElectrical Connections Electric Power SupplyDo not use a power cord Electrical LayoutCompleted SteamChef 6.1 Shown Startup ProcedureInterior Accessories Operating TestsDrain Rinse Inspection continue from Startup Procedure Page Page Operator’s Trouble Shooting Guide INSTALLER’S Troubleshooting GuideOn Next To verify the steamers See Warning underProper operation see Troubleshooting Notes

22CET6.1, 22CET3.1 specifications

The Cleveland Range 22CET3.1 and 22CET6.1 are exceptional cooking units designed for high-performance in commercial kitchens. These versatile countertop electric tilting braising pans are engineered to provide chefs with a reliable and efficient tool for a myriad of cooking tasks.

One of the standout features of the 22CET series is the ability to tilt, allowing for easy pouring and transferring of food. This innovative design not only saves time but also enhances safety by minimizing the risk of spills and burns. Equipped with an intuitive control panel, chefs can quickly adjust the temperature settings for precise cooking. The digital control panel also offers easy readability, ensuring that chefs can monitor cooking temperatures effectively.

The Cleveland Range 22CET3.1 has a 30-gallon capacity, while the 22CET6.1 boasts a larger 60-gallon capacity, catering to operations of different scales. Both models are constructed from high-quality stainless steel, ensuring durability and resistance to the rigors of a busy kitchen environment. The robust design also facilitates easy cleaning and maintenance, making them ideal for foodservice operations.

Incorporating advanced heating technologies, these braising pans feature a direct steam heating method which provides rapid temperature recovery. This feature is particularly beneficial for high-volume kitchens, allowing chefs to cook large quantities of food consistently and quickly. The even heat distribution ensures that food is cooked uniformly, reducing the chances of burning or uneven cooking.

Another notable characteristic of the Cleveland Range 22CET models is their ability to handle a variety of cooking methods, including steaming, braising, sautéing, and simmering. This versatility allows chefs to create a diverse menu, ranging from soups and stews to stir-fries and sauces.

Safety features are also prominent in the design of the Cleveland Range 22CET3.1 and 22CET6.1. The built-in safety thermostat and high-limit switch provide peace of mind by preventing overheating during operation. Furthermore, the cool-touch handle ensures that manipulating the tilting mechanism remains safe for the users.

In conclusion, the Cleveland Range 22CET3.1 and 22CET6.1 are powerful, reliable, and versatile cooking solutions for professional kitchens. Their combination of efficiency, safety, and ease of use positions them as essential tools for culinary professionals looking to elevate their cooking capabilities.
Top Page Image Contents