Use & Care Manual
ENGLISH
When the cooktop is connected to the electrical voltage supply all lights and digits turn on to indicate a proper activation. This operation will be completed after few seconds, the control turns off automatically. Now the cooktop is ready for operations.
are locked (see that the lock led is on and turns off after a few seconds).
single zone available for selection.
All the displays show power level “0”, if no actions are performed the control shuts down again after about 10 seconds.
desired zone: the HOT SURFACE (ref.3) indication
5b | 5a |
| 4 |
2 | 1 |
| 3 |
Touch the slide bar to set the power level (levels 0 to
touching the desired value. If your cooktop model has
power level (ref.7).
The display (ref.4) show the power level, updated in real time.
After a 5 seconds
steady.
expires.
7
Figure. 7
Once a cooking zone has been selected, touch the
Power Scale (ref.9) then set the power level in the usual way.
8
Figure. 8
The control uses only the 15% of the available power, divided in 0 to 9 steps with a better accuracy.
Keep in mind that power level 9 in this special mode correspond exactly to level 4 in the standard range.
in order to disable the Low Power Scale and restore the standard one, without switching off the zone.
Pay attention: the level remains the same but the power increases.
10