Rangemaster U109948 - 04 manual Cleaning Your Cooker, Daily Care, Cleaning Spills

Page 15

DocNo.045-0011 - Cleaning - 110 Induction - tpl glzd & std grill

5. Cleaning Your Cooker

Isolate the electricity supply before carrying out any major cleaning. Allow the cooker to cool.

Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not mix different cleaning products – they may react together with hazardous results.

All parts of the cooker can be cleaned with hot soapy water

–but take care that no surplus water seeps into the appliance.

We have developed a range of cleaning products that give maximum performance without damaging the enamel and painted surfaces, in particular a Ceramic Hob Cleaner set with scraper. More information is available through either the Cookware Collection brochure supplied with your cooker or our website www.rangemastercookshop.co.uk.

Remember to switch the electricity supply back on and reset the clock before reusing the cooker.

Hob

Daily Care

First of all make sure that all heat indicator lights are off and that the cooking surface is cool. Apply a small dab of ceramic cleaning cream in the centre of each area to be cleaned. Dampen a clean paper towel and work the cream onto the cooking surface. As a final step, wipe the cooking surface with a clean, dry paper towel.

Cleaning Spills

For spills and boil-overs that occur while cooking, turn the unit off and wipe the area surrounding the hot zone with a clean paper towel. If a spill (other than a sugary substance) is on the hot zone, do not clean until the unit has completely cooled down, and then follow the instructions below (‘Cleaning burned-on spills’).

If you accidentally melt anything on the surface, or if you spill foods with a high sugar content (preserves, tomato sauce, fruit juice, etc.), remove the spill IMMEDIATELY with a razor scraper, while the unit is still hot.

IMPORTANT: Use an oven glove to protect your hand from potential burns.

Scrape the major spill or melted material from the cooking zone and push into a cold area. Then, turn the unit ‘OFF’ and allow it to cool before cleaning further. After the cooking surface cools down and the heat indicator lights go off, follow the ‘Daily Care’ procedure outlined above.

Cleaning Burned-on Spills

Make sure that the heat indicator lights are off and that the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of about 30° to the surface and then scrape off the burned-on matter (Fig.5-1).

Fig.5-1

ArtNo.312-0010 Cleaning; scraping the ceramic hob

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Guide Contents Ventilation Personal SafetyInstallation and Maintenance Before You Start do not use the hob surface as a cutting board CleaningHob Care Cooker CareHob Cooker OverviewResidual Heat Indicator, H Pan DetectorAutomatic Heat-up, a Grill Child Lock, LBoil Dry Function Right-Hand Oven  Never close the grill door when the grill is onOvens Left-Hand OvenTo stop the right-hand oven automatically Setting the time of daySetting the minute minder ClockKey Lock Auto is showing, you want to reset to manual cookingAccessories Oven ShelvesHandyrack Main Oven Light Browning ElementStorage Tips on Cooking with the Timer Cooking TipsGeneral Oven Tips Meat Cooking TableDaily Care Cleaning Your CookerCleaning Spills Cleaning Burned-on Spills do not use any abrasive substances Control Panel and DoorsDoor Panel To Remove Metal Rub-offRemoving the Panels to clean the Enamel Interior ‘Cook & Clean’ PanelsTroubleshooting Food is cooking too slowly, too quickly, or burning Timed oven is not coming on when turned on manuallyTimed oven is not coming on when automatic cooking Oven temperature getting hotter as the cooker gets olderProvision of Ventilation InstallationDear Installer Safety RequirementsPositioning the Cooker Unpacking the CookerMoving the Cooker Completing the Move Repositioning the Cooker following ConnectionLevelling Oven Check Electrical ConnectionHob Check Grill CheckTo Replace a Hob Element ServicingTo Lift up the Ceramic Hob To Remove the Control PanelTo Remove the Electronic Timer To Replace a ThermostatTo Remove the Grill Door To Replace an Oven Door To Adjust an Oven Door AngleTo Replace the Grill Controller To Remove the Grill ElementTo Remove an Oven Inner Back To Adjust an Oven Door Catch KeepTo Replace an Oven Door Seal To Remove an Oven Element Thermal Cut-outTo Replace an Oven Fan To Remove the Left-hand Oven Bottom and Top ElementsTo Change Oven Light Bulb Key Circuit Diagram OvenCircuit Diagram Hob 3kW 4kW3kW2.3kW 4kW Technical Data DimensionsConnections DocNo.000-0001 Back cover Rangemaster
Top Page Image Contents