Rangemaster U109948 - 04 manual Clock, Setting the time of day, Setting the minute minder

The Clock

Setting the time of day

The LCD clock is shown in (Fig 2-14). When the clock is first connected the display flashes ( 0.00) and () alternately.

Press and hold both the [] and [] buttons as shown in Fig.2-15. While holding these buttons press either the (–) or

(+)until the correct time shows. Remember this is a 24-hour clock. If you make a mistake or press the wrong button, turn off the power supply for a minute or two and start again.

Setting the minute minder

Press and hold the minute minder () button (Fig.2-16). At the same time press either the (–) or (+) until the time you want to cook for is shown (Fig.2-17).

You can check time remaining by pressing () and cancel the beeper by pressing ().

To stop the right-hand oven automatically

Press and hold the Stop Time () button (Fig.2-18). While holding the () button press either the (–) or (+) until the required ‘stop time’ shows. AUTO will show in the display.

Once the ‘stop time’ is reached, the beeper sounds. Turn the oven control knob to 0 first, and then press () once to stop the beep, press () again to return to manual cooking.

To start and stop the right-hand oven automatically

Before you set the clock, you must have two numbers clearly in mind.

The ‘cook period’, which is the period of time you want the oven to cook.

The ‘stop time’, which is the time of day you want the oven to stop cooking.

You cannot set a start time directly – this is set automatically by setting the cooking period and stop time.

Press and hold the () button (Fig.2-19). While holding the () button, press either (–) or (+) button until the required ‘cook period’ shows.

Then press and hold the () button (Fig.2-20). While holding the () button, press either (–) or (+) button until the required ‘stop time’ shows.

AUTO will now show in the display.

Set the oven to the required temperature. When cooking is finished the beeper will sound. Turn the oven knob to the OFF position first, and then press the () button once to stop the beep, and press it again to return to manual cooking.

If you are out, do not worry about the beeper going off, it stops after a while. When you return, turn the oven knob to 0 first, and then press () twice, to return to manual cooking.

Fig.2-14

ArtNo.302-0002 - 6BC annotated

A B C D E F

A – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time,

D – Manual, E & F – Time setting buttons

Fig.2-15

ArtNo.302-0001 - 6-button clock

Fig.2-16

ArtNo.302-0003 - 6BC minute minder setting 1

Fig.2-17

ArtNo.302-0004 -

Minute minder setting 2

Fig.2-18

ArtNo.302-0005 - 6BC Stopping the oven 1

Fig.2-19

ArtNo.302-0006 - 6BC

setting the cook time

Fig.2-20

ArtNo.302-0007 -

Setting the stop time

7