Rangemaster U109948 - 04 manual To Replace an Oven Fan, To Change Oven Light Bulb

Page 28

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have finished.

Fig.8-12

ArtNo.322-0002 Oven bottom element access

� �

�

Fig.8-13

Fig.8-14

ArtNo.324-0007 Unscrewing the bulb cover

ArtNo.324-0005 Oven light bulb

20.To Replace an Oven Fan

Disconnect from electricity supply.

Pull the cooker forward to gain access to the rear. Remove the screws securing the electric cover to the back sheet and remove the cover.

Disconnect the three terminals connected to the fan noting their position. Remove the oven inner back (see 18). Hold the fan blade and remove the centre nut (left-hand thread) two brass washers, fan blade and circlip. Unscrew the fan retaining nuts and washers (three off each) and lift the fan away from the rear of the cooker. Fit the new fan and reassemble in reverse order. Check the operation of the oven.

21.To Remove the Left-hand Oven Bottom and Top Elements

Disconnect from the electricity supply. Bottom Element

Pull the cooker forward to access the cover boxes at the rear of the unit. Remove the fixings that secure the cover and lift it clear.

Remove the two screws ‘A’ and allow the plate to drop down (Fig.8-12). Remove the two screws B, lower the upper plate and remove through the slot in the cooker back.

Undo the terminal connections, noting their positions.

Remove the element fixings and withdraw element. Replace the element and re-assemble parts in reverse order.

Top Element

Open the left-hand oven door and undo the fixings that secure the heat shield. Remove the top element bracket fixings and withdraw element. Replace the element and re- assemble parts in reverse order. Check that the oven operates satisfactorily.

22.To Change Oven Light Bulb

Disconnect from electricity supply.

Make sure the oven is cool. Open the oven door and remove the oven shelves. Remove the grill pan and support from the grill chamber.

Unscrew the bulb cover by turning anticlockwise. It may be very stiff (Fig.8-13).

Taking care to protect your fingers in case the bulb should shatter, unscrew the old bulb.

Fit an Edison screw fitting 15W 240V lamp, FOR OVENS. It must be a special bulb, heat resistant to 300°C (Fig.8-14).

Screw in the new bulb, and then screw back the bulb cover. Turn on the electricity supply and check that the bulb now lights.

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents User Guide Contents Personal Safety Installation and MaintenanceBefore You Start VentilationCleaning Hob CareCooker Care  do not use the hob surface as a cutting boardCooker Overview HobPan Detector Residual Heat Indicator, HAutomatic Heat-up, a Child Lock, L GrillBoil Dry Function  Never close the grill door when the grill is on OvensLeft-Hand Oven Right-Hand OvenSetting the time of day Setting the minute minderClock To stop the right-hand oven automaticallyAuto is showing, you want to reset to manual cooking Key LockOven Shelves AccessoriesHandyrack Browning Element Main Oven LightStorage Cooking Tips Tips on Cooking with the TimerGeneral Oven Tips Cooking Table MeatCleaning Your Cooker Cleaning SpillsCleaning Burned-on Spills Daily CareControl Panel and Doors Door PanelTo Remove Metal Rub-off  do not use any abrasive substances‘Cook & Clean’ Panels Removing the Panels to clean the Enamel InteriorTroubleshooting Timed oven is not coming on when turned on manually Timed oven is not coming on when automatic cookingOven temperature getting hotter as the cooker gets older Food is cooking too slowly, too quickly, or burningInstallation Dear InstallerSafety Requirements Provision of VentilationUnpacking the Cooker Positioning the CookerMoving the Cooker Repositioning the Cooker following Connection Completing the MoveLevelling Electrical Connection Hob CheckGrill Check Oven CheckServicing To Lift up the Ceramic HobTo Remove the Control Panel To Replace a Hob ElementTo Replace a Thermostat To Remove the Electronic TimerTo Remove the Grill Door To Adjust an Oven Door Angle To Replace the Grill ControllerTo Remove the Grill Element To Replace an Oven DoorTo Adjust an Oven Door Catch Keep To Replace an Oven Door SealTo Remove an Oven Element Thermal Cut-out To Remove an Oven Inner BackTo Remove the Left-hand Oven Bottom and Top Elements To Replace an Oven FanTo Change Oven Light Bulb Circuit Diagram Oven Key3kW 4kW Circuit Diagram Hob3kW2.3kW 4kW Dimensions Technical DataConnections DocNo.000-0001 Back cover Rangemaster
Top Page Image Contents