Unified Brands VENTILATION SYSTEMS specifications d. Reviewing The Daily Event Schedule

Page 18

"SAVE ENTER" to retain that time. Press "RETURN CLOCK" to return to Normal Display.

d. Reviewing The Daily Event Schedule

The Daily Event Schedule is a program which will automatically turn the fans on and off and/or initiate the PAWS up to four [4] times each day. Each day may be different from another or it may be programmed to stay off for the entire day. To review the Daily Event Schedule, press "CHECK". The display will show "CHECK MODE SELECTED" and then indicate the first programmed event of that day. If there are no events programmed for that day, it will display the next programmed event. If there are entries in the Daily Event Schedule, press "NEXT" to see the next event and/or press "LAST" to see the previous event. Press "RETURN CLOCK" to return to Normal Display. If no key is pressed for thirty [30] seconds the display will automatically change to Normal Display.

e. Changing The Daily Event Schedule

In order to make initial entires in the Daily Event Schedule or change existing entries, press "PROGRAM DAY". The display will show "PROGRAM MODE SELECTED" then ask which day's events are to be changed. Press "DAY+" and/or "DAY-"to select the desired day, then press "SAVE ENTER". If no events are programmed to occur that day, the display will indicate "FAN ON UNPROG". If events are programmed for the day selected, that day's first event will be displayed. If an event other than the one being displayed is to be entered or changed, press "NEXT" until the correct event is displayed. Press "CHANGE CLEAR".

NOTE: WHEN AN EVENT IS CHANGED, ALL EVENTS WHICH ARE SCHEDULED TO OCCUR ON THAT DAY AFTER THE EVENT BEING CHANGED ARE ERASED.

The time will begin to flash. Press "HOUR+" and/or "HOUR-"to select the desired hour. Press "MINUTE+" and/or "MINUTE-"to select the desired minute. When the correct time is displayed, press "SAVE ENTER". Press "NEXT" to access the next event.

NOTE: A "FAN ON" EVENT MUST BE FOLLOWED BY A "FAN OFF" EVENT.

Repeat the programming procedure indicated

above. When you have completed programming the events for that day, press

"RETURN CLOCK" to return to Normal Display. If no key is pressed for thirty [30] seconds, the display will automatically return for Normal Display.

To program Daily Event Schedules for additional days, particularly if they are different from the schedule already programmed, repeat the previous steps.

f. Repeating The Daily Event Schedule

If you wish to repeat the Daily Event Schedule from one day to another, press "REPEAT DAY". The display will show "REPEAT MODE SELECTED", then ask which day's Daily Event Schedule is to be repeated. Select the intended day by pressing "DAY+" and/or "DAY- ". When the proper day is displayed, press "SAVE ENTER". The display will then ask on which day that Daily Event Schedule is to be repeated. Press "DAY+" and/or "DAY-"until the proper day is displayed, then press "SAVE ENTER". The display will acknowledge that the schedule has been copied, then return to the starting Repeat Day display. Continue as outlined above to repeat additional Daily Event Schedules.

NOTE: IF A DAY HAS ALREADY BEEN PROGRAMMED FOR A DAILY EVENT SCHEDULE, THE ORIGINAL WILL BE ERASED AND REPLACED BY THE REPEAT SCHEDULE.

When you are finished repeating Daily Event Schedules, press "RETURN CLOCK" to return to Normal Display. If no key is pressed for thirty [30] seconds, the display will return to Normal Display, automatically.

g. Holiday Feature

To temporarily suspend a programmed Daily Event Schedule for a particular day during the upcoming seven [7] day period, press "HOLIDAY". The display will show the status of the current day. Select the day's Daily Event Schedule which you wish to suspend [make a Holiday] by pressing "DAY+" and/or "DAY-". Press "CHANGE CLEAR" to make that day a holiday. Press "DAY+" and/or "DAY-"to select additional Holidays press "RETURN CLOCK" to return to Normal Display. If no key is pressed for thirty [30] seconds, the display will automatically return to Normal Display. After the Holiday passes, the Daily Event Schedule will resume normally. The Manual Controls will operate normally during a Holiday.

15

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 1055 Mendell Davis Drive Jackson, MS VENTILATION SYSTEMSOPERATORS MANUAL 888-994-7636,fax avtecind.comTABLE OF CONTENTS PERIODIC MAINTENANCE VENTILATOR FEATURES AND ACCESSORIESAir Adjustment Baffle G. Fusible Link Replacement1I. TYPES OF SYSTEMS Installation shall be in accordance with NFPA NOTE Welds must not impede operation of damper Page Page Fig 8a Fig 8b 9.Terminal Block #11 TB-11has three 3 pairs of terminals. The first pair of terminals are low voltage connections for the detergent low level probe. The probe should be installed in the detergent container so that it does not protrude above the top of the detergent pump inlet strainer. fig. #9 This is intended to prevent cavitation of the pump and will advise when the tank needs to be refilled. The probe rods may be cut to facilitate a neat and effective installation Terminal Block Designation For authorized sevice techinician use onlyError! Not a valid link Page VI. OPERATION vac as long as the START Button is depressed a. Fan Start b. Setting the PAWS d. Reviewing The Daily Event Schedule OFF/WASH Page l. Detergent Pump and Tank Refer to fig E. Fire Dampers 1. Fusible Link Type fig. 3. Slot-TypeInternal Air Make-Up D. Grease Collection Receptacle C. PAWS/VCW PANEL - PLUMBING A. PAWS PANEL - ELECTRICALB. VCW PANEL - ELECTRICAL ITEM NOITEM NO D. EVAC DETERGENTE. ELECTRO - MECHANICAL DAMPER DESCRIPTIONITEM NO F. FUSIBLE LINK DAMPERG. HOOD CANOPY AVTEC PART NOFor Exhaust Ventilator Auto-washCleaner Cleaner/DegreaserCleaner/Degreaser UNIQUE, POWERFUL CLEANING FORMULAA. ENERGY AIRE HOODS - EXHAUST AIR MOVEMENT RECORDINGSProject Name B. FILTER HOODS - EXHAUSTPage CALCULATING AND RECORDING AIR MOVEMENT EXHAUSTSUPPLY AVTEC SERVICE AGENCY, CALL OR WRITE TO FOR THE NAME AND LOCATION OF THE NEAREST
Top Page Image Contents