Unified Brands HY-6E(CE) Door Spring P/N, Door Locking Pin P/N Lock Nut P/N, 30 OM/SM-HY-6ECE

Page 30

1.Turn steamer off and allow it to cool.

2.Remove screws and U-channel from the door.

3.Remove screws, door handle, and cam.

4.Apply a NEVER-SEEZ high temperature compound to the door cam and Locktite 242 to screw threads.

5.Assemble door cam to handle with screws.

6.Be sure door handle is in the DOWN position. Hold U-channel door spring open with a screwdriver or similar tool, then install the U-channel. Do NOT install screws at this time

7.Check operation of the cam and door spring. Push up on the door handle and check if spring opens. If the spring does not open, the cam and spring are not correctly aligned and the problem must be corrected.

8.Apply a light amount of Locktite 242 to screws, then install screws.

10.28Door Spring P/N 078911

1.Turn off steamer and allow it to cool.

2.With flat blade screwdriver, remove two 8-32 truss head screws on U-channel and remove U-channel from door.

3.Carefully remove retaining ring from one end of spring support pin, then remove the pin by moving the pin to the left and to the right.

4.With a socket wrench, remove the 10-32 Keps nut, lift the square plate, and then remove the spring.

To Install:

5.Apply a high temperature (rated 250ºC) anti-seize, lubricating compound (NEVER-SEEZ) on the bottom of the U-channel surface that connects with the spring.

6.Install spring onto brass roller, then place square plate over spring.

7.Apply Locktite 242 to Keps nut and install Keps nut.

8.Install spring support pin, then push the retaining ring onto the pin using a screwdriver.

9.Hold door spring open with a screwdriver or similar tool, hold door handle in the down position and install the U-channel, top end first - then lower channel into

position. Check that spring opens when door handle is pushed up.

10.Apply Locktite 242 to U-channel mounting screws, then install the screws.

11.Replace the two 8-32 truss head screws in the U- channel, applying Locktite 242 to secure them in place.

10.29Door Locking Pin P/N 078914

Lock Nut P/N 003823

1.Turn steamer off and allow it to cool

2.Note and record the distance between the lock nut and the end of the (bullet shaped) door locking pin. This information is important and will be needed for installation.

3.Loosen lock nut and remove lock nut and door pin (bullet) from front panel.

4.To install new door locking pin, coat locking pin threads with NEVER-SEEZ high temperature compound.

5.Install locking pin and lock nut. The lock nut to end-of- bullet distance should be approximately the same as measured above, in Step 2.

30 OM/SM-HY-6E(CE)

Page 29 Page 31
Image 30
Page 29 Page 31
Contents HY-6ECE Hypersteam Atmospheric Convection Important Read First Important Steam can Cause Burns Table of Contents ReferencesEquipment Description Inspection and UnpackingWater Conditioning Bpst Connection on the right rear side of the steamerInstallation and Start-Up Electrical Supply ConnectionElectrical Supply Connections Water ConnectionsOperating Procedure OperationControls 10 OM/SM-HY-6ECE Suggested Tools CleaningProcedure Outside of Steamer OM/SM-HY-6ECEIf the Service light stays on Steam Generator and Cooking ChamberMaintenance TroubleshootingKey Description Parts ListExternal Cabinet and Sheet Metal 14 OM/SM-HY-6ECECavity Control Section Steamer Base Section 16 OM/SM-HY-6ECESteamer Base Rear View Steamer Motor and Controls 18 OM/SM-HY-6ECESteamer Generator Individual Parts Key Description NewSteamer Individual Parts 20 OM/SM-HY-6ECETop Right Side Panel Louvered Removal P/N Service InformationAdjustable Legs P/N 10.3 Top/Left Side Removal P/NWater Inlet Valve Coil To TestWater Inlet Valve Three Way P/N Drain Box Spray Nozzle P/NSteam Generator P/N To InstallHeater Assembly Complete with High Limit Thermostat Steam Generator Probes High and Low Water P/NTo Prepare 24 OM/SM-HY-6ECETimer Assembly Timer Fastener Nut Control Voltage Transformer P/NElectrical Contactor 10.17 Fan Fan Motor Assembly Motor Insulation Motor Shaft SealTo Install a New Motor 26 OM/SM-HY-6ECESteam Generator Ready Thermostat P/N To Install New CapacitorMotor Starting Capacitor P/N Steam Port GasketDoor Reversing Procedures Door Removal/Installation/Alignment P/NDoor Switch P/N To AlignDoor Handle, Magnet and Block Assembly Door Gasket P/NDoor Spring P/N Door Locking Pin P/N Lock Nut P/N30 OM/SM-HY-6ECE Electrical Schematic Service Log 32 OM/SM-HY-6ECELimited Warranty To Commercial Purchasers Part Number 128717, REV. B 4/06

HY-6E(CE) specifications

Unified Brands HY-6E(CE) is a state-of-the-art cooking appliance specifically designed for professional kitchens, providing top-notch technology, efficiency, and capability. This equipment stands out due to its combination of advanced features and user-friendly controls, making it an ideal choice for restaurants, catering services, and foodservice operations.

One of the most notable features of the HY-6E(CE) is its powerful heating system, which allows for rapid cooking times and consistent results. The unit is equipped with a high-efficiency burner system that ensures even heat distribution while minimizing energy consumption. This innovative technology not only enhances cooking performance but also contributes to cost savings in energy usage.

Another significant characteristic of the HY-6E(CE) is its versatility. The appliance supports various cooking methods, including boiling, frying, steaming, and simmering, making it suitable for a wide range of culinary applications. This adaptability enables chefs to prepare multiple dishes simultaneously, thereby increasing kitchen productivity.

The design of the HY-6E(CE) emphasizes durability and ease of maintenance. Constructed from high-grade stainless steel, it is built to withstand the rigors of a busy kitchen while resisting corrosion and wear. The smooth surfaces and streamlined design facilitate quick cleaning, ensuring that hygiene standards are upheld without excessive downtime.

In terms of control and monitoring, the HY-6E(CE) features an intuitive digital interface that allows chefs to set precise temperature and timing. This level of control is crucial for maintaining culinary consistency and quality, especially in high-pressure environments. The appliance also includes safety features such as automatic shut-off and flame failure protection, ensuring a safe cooking experience.

The HY-6E(CE) is further enhanced with smart technology options that enable remote monitoring and adjustments via mobile applications. This connectivity allows operators to oversee kitchen operations from any location, optimizing workflow and ensuring that meal preparation runs smoothly.

In conclusion, the Unified Brands HY-6E(CE) is an exemplary cooking appliance that merges efficiency, versatility, and advanced technology. Its features cater to the dynamic needs of the modern kitchen, making it a valuable addition for culinary professionals who prioritize performance and reliability in their cooking operations.
Top Page Image Contents