8.Install bottom hinge on cabi- net, opposite side, aligning flat edge of hinge with outer edge of unit. Partially tighten screws until door is aligned. See Figure 23.
9. Relocate plastic spacer/ |
|
bushing on bottom of door to |
|
opposite side, and place door |
|
on bottom hinge pin (see |
|
Figure 18). Clean out bush- |
|
ing hole in door bottom with | UL129 |
a screwdriver if needed. | Figure 23 |
10.Place door on lower hinge pin. Align flat edge of top hinge with outer edge of unit and fasten upper hinge to unit (4 screws). Partially tighten screws until door is aligned. See Figure 21.
11.Adjust door to assure proper seal. Tighten upper and lower hinge screws securely.
12.Replace four plastic plugs removed in step 5 into holes on top of unit. Replace screws in holes in bottom of unit, opposite side.
13.Reinspect door seal and alignment. Adjust if needed.
14.Reinstall grill (1 screw).
ALIGNING THE DOOR
For proper door alignment:
1.Loosen top and bottom hinge screws (see Figure 14).
2.Align door squarely with cabinet.
3.Assure gasket is firmly in contact with cabinet all the way around the door (no gaps).
4.Tighten bottom hinge screws.
5.Tighten top hinge screws.
15 